Weight Weenies
http://weightweenies.starbike.com/forum/

Best place to buy Nokon's. Least expensive place that is.
http://weightweenies.starbike.com/forum/viewtopic.php?f=3&t=26473
Page 1 of 1

Author:  BmanX [ Sun Feb 04, 2007 5:16 am ]
Post subject:  Best place to buy Nokon's. Least expensive place that is.

So after getting ripped off on ebay and hopefully getting my money back, I have to find 2 pairs of Black Nokon Shimano Shifter sets. I have the brake cable sets on the way thanks to a very good Ebay store but they do not have any of the shifter sets. Anyone know what the least expensive place to get Nokon's is.

Author:  KF [ Sun Feb 04, 2007 10:04 am ]
Post subject: 

I have bought Nokons at www.bike-components.de

I have no idea if they are the cheapest, but they are cheap.

Author:  Weenie [ Sun Feb 04, 2007 10:04 am ]
Post subject: 


Author:  KF [ Sun Feb 04, 2007 10:05 am ]
Post subject: 

Here's the direct link...: http://www.bike-components.de/catalog/a ... on&x=0&y=0

Author:  Juanmoretime [ Sun Feb 04, 2007 12:10 pm ]
Post subject: 

http://aebike.com/page.cfm?PageID=30&ac ... sku=CA4840

8)

Author:  darbydog [ Sun Feb 04, 2007 1:36 pm ]
Post subject: 

Bman88 check your pm

Author:  jrennie [ Sun Feb 04, 2007 4:31 pm ]
Post subject: 

What is the difference between the campy and shimano nokon sets? I want to get a set for sram shifter but not sure which one.

Author:  KF [ Sun Feb 04, 2007 4:38 pm ]
Post subject: 

jrennie wrote:
What is the difference between the campy and shimano nokon sets? I want to get a set for sram shifter but not sure which one.


I guess that is the Campagnolo set you want for that. - It has something to do with the routing of the cables.

Author:  jrennie [ Sun Feb 04, 2007 5:00 pm ]
Post subject: 

thats what I am guessing also but just trying to find any imput from someone who has done it.

Author:  Weenie [ Sun Feb 04, 2007 5:00 pm ]
Post subject: 


Author:  Boonen [ Sun Feb 04, 2007 6:13 pm ]
Post subject: 

jrennie wrote:
thats what I am guessing also but just trying to find any imput from someone who has done it.


You would want the campy set for that. They have the rods for under the bartape for both the brakes and the gears. You could also use the pearls under the bartape if you seal them properly but most people I have heard that did this had some problems with them oxidizing.

I don't have any suggestions for where to buy them. If your lbs doesn't have them I would have a look at one of the site sponsors here :noidea:

Page 1 of 1 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/