I have two questions that hopefully someone can provide some guidance on.
1) Seat posts – Corima Ellipse vs. USE Aero seat post. Does anyone have recommendations on one vs. the other regarding their mechanical properties and their performance.
2) Tune 66 hubs. I just build a wheel up using a Zipp 280 rim and DT Aerolite spokes. The first time I was placing in the wheel in the dropouts and locking the quick release down an audible “ping” was present. I removed the wheel and all spokes were tight and sound, no play is present in the hub and the wheel seems to perform very well. I check the true – lateral and radial and both are just the same as they were when the wheel was finished and tension balanced. Spoke tension remains balanced also. Any suggestions on what may have caused the sound?
Thanks.
Aero Seatposts + Tune 66 hub
Moderator: robbosmans
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
- Ye Olde Balde One
- Posts: 481
- Joined: Sun Oct 19, 2003 4:26 pm
- Location: Santa Monica, CA
#2. Probably seating the bearings/axle assembly.
Ride lightly!
- Frankie - B
- Admin - In the industry
- Posts: 6573
- Joined: Mon Jun 02, 2003 8:17 am
- Location: Drenthe, Holland
Maybe it was the spoke nipple beading into the rim. or just the spoke finding it's "place" in the wheel.
When one of my mtb wheels is trued, i usually hear the spokes making ping noises the first 500 meter.
When one of my mtb wheels is trued, i usually hear the spokes making ping noises the first 500 meter.
If you want to see 'meh' content of me and my bike you can follow my life in pictures here!'Tape was made to wrap your GF's gifts, NOT hold a freakin tire on.'