Garmin face plate mounts?

[PLuKE]

Hi

I currently have a Deda Superleggero stem, and I am after a Garmin 1000 mount that bolts onto the stem face plate.

I have a K Edge at the moment, but fancy a change. Can anyone point me in a direct?

Thanks

[bremerradkurier]

Something like this?

https://www.aliexpress.com/item/3-in-1- ... autifyAB=0

[PLuKE]

Something like this?

https://www.aliexpress.com/item/3-in-1- ... autifyAB=0

Thanks, That has a slot to accommodate bolt hole width. But, I am not sure thats really that safe? and being off Aliexpress.

Maybe I need to measure the bolt width, and see whats out there.

[bremerradkurier]

Something like this?

https://www.aliexpress.com/item/3-in-1- ... autifyAB=0

Thanks, That has a slot to accommodate bolt hole width. But, I am not sure thats really that safe? and being off Aliexpress.

Maybe I need to measure the bolt width, and see whats out there.

The mount itself is aluminum-a pair of known quality stainless bolts wouldn't be all that much.

[ManekiNico]

Fetha makes a mount with a 17 mm bolt pitch, which should fit if I'm measuring right. Strangely, they skip 18 mm and offer 19 to 35 mm pitches in 1 mm increments.

https://www.fetha.com.au/product-page/a ... late-mount

Edited to add: Knew I was forgetting someone… Edge-Mount also makes a 17 mm mount.

http://edge-mount.bike/?product=mount-17

There's a whole thread about them here: viewtopic.php?f=3&t=28122.

[TheDoctor]

I used this Fouriers mount for quite a while, worked well for me:
https://m.aliexpress.com/item/32429279430.html

[Wookski]

In feather you’re limited to the adjustable mounts unless you have a 3T stem. The adjustable mounts suck.

Try carbonworks or alptitude- both carbon and light.

[Wookski]

I used this Fouriers mount for quite a while, worked well for me:
https://m.aliexpress.com/item/32429279430.html

Man that is one ugly ass mount

[r33prman]

I have a featha on my deda zero100 -8 with a wahoo bolt. Best out front Mount Ever!

DT

[NiFTY]

The fetha is great.

[PLuKE]

Thanks.

I think the best thing is to measure the bolt width, and see what mounts would then fit my Garmin 1000 and the Deda stem.

I would rather have a fixed bolt mount, the adjustable bolt width look kind of unsafe?

Luke