Wishbone Bottom Bracket

Discuss light weight issues concerning road bikes & parts.
Post Reply
vinuneuro
Posts: 103
Joined: Mon Mar 06, 2017 10:34 pm
Location: Chicago

by vinuneuro

These are reasonably priced and based on the feedback I've across they seem to be solid bottom brackets. Anyone know about the following?

-Is the BB body metal or plastic?

-Are the bearing seals low friction for road or high sealing for cyclocross/mtb/wet riding?

-When the bearings wear out, can they be replaced or does the whole BB need to be replaced?

-Are the bearings a standard size?

Thanks in advance.
'16 Spec Diverge Expert

by Weenie


lwk
Posts: 68
Joined: Sun Apr 24, 2016 11:02 am

by lwk

If I may ask, where are you planning to buy the bb from?

vinuneuro
Posts: 103
Joined: Mon Mar 06, 2017 10:34 pm
Location: Chicago

by vinuneuro

There is a seller on ebay named mr_ride that seems to carry most of their products if not all.

http://stores.ebay.com/mrridebicycle/

I can answer a few of the questions:

-Looking closely at a couple of their BB's the seals say 6806-2RS, so they are standard size bearings
-and double sided seal so good for wet weather riding.
-The BB bodies have machine marks so must be alloy rather than plastic

Still not sure if the bearings can be easily pulled out to service.
'16 Spec Diverge Expert

lwk
Posts: 68
Joined: Sun Apr 24, 2016 11:02 am

by lwk

I haven’t had the best experience with the same vendor. He was slow to respond to messages and after a month of waiting patiently for tracking information, I lodged a complaint and received my money back. Don’t know why he never posted the bb. Wishbone themselves also don’t answer emails......

AZR3
Posts: 647
Joined: Wed Sep 12, 2012 9:00 pm
Location: Az USA

by AZR3

For what it’s worth I’ve purchased a bunch of KMC chains from mr_ride over the years and never had an issue.

MrMojo
Posts: 86
Joined: Thu Feb 10, 2011 2:24 pm
Location: UK

by MrMojo

I’ve been thinking about getting the Wishbone Threadfit Shimano bottom bracket for the C60 for a while now but can find very little if anything about them.
2017 Colnago C60
2012 Colnago C59
2008 Colnago Extreme C
2005 Colnago C50
2002 Colnago C40 Mapei
2001 Colnago C40

User avatar
micky
Posts: 4665
Joined: Thu Sep 21, 2006 8:57 pm
Location: Vicenza
Contact:

by micky

Wishbone started their business with carbon wheels (I have a pair, basically Gigantex stock wheels) and then switched to making bottom brackets for all kind of combinations, but I can't speak for this as I didnt have chance to try.

User avatar
Calnago
Posts: 5651
Joined: Sun Nov 07, 2010 9:14 pm

by Calnago

You may as well wait to see what Ceramic Speed has come up with for the Colnago C64. It should work on the same premise as the Wishbone solution in that it’s an option which replaces the Threadfit cups which come standard with the frame.
Colnago C64 - The Naked Build; Colnago C60 - PR99; Trek Koppenberg - Where Emonda and Domane Meet;
Unlinked Builds (searchable): Colnago C59 - 5 Years Later; Trek Emonda SL Campagnolo SR; Special Colnago EPQ

garypremo
Posts: 22
Joined: Wed Jul 27, 2016 9:09 pm
Location: San Francisco Bay Area

by garypremo

I also posted this info in the thread: Colnago C60 - Campagnolo bottom bracket. I apologize if you are seeing it twice.

I contacted Ceramicspeed to find out when information will be available on the Threadfit 82.5 bottom bracket solutions for Colnago models with the TF82.5 standard. Below is the reply:

Hi Gary

Thank you for the mail and your interest in our new product.
The Website should have it up on next Friday. They are working on it, in Marketing.

Venlig hilsen / Best regards,

Kim Sigkjær Jakobsen
Sales & Logistics Support

Noergaardsvej 3
DK-7500 Holstebro

Mobile: +45 25101425
Skype: Ksj_Ceramicspeed.com

I am assuming "next Friday" means February 23, 2018.

-Gary
2016 Colnago C60 PLWH 61 CM Traditional Geometry

MrMojo
Posts: 86
Joined: Thu Feb 10, 2011 2:24 pm
Location: UK

by MrMojo

Very much interested in the Ceramic Speed BB. I saw they are making one, cheers.
2017 Colnago C60
2012 Colnago C59
2008 Colnago Extreme C
2005 Colnago C50
2002 Colnago C40 Mapei
2001 Colnago C40

nickstea
Posts: 43
Joined: Sat Jan 27, 2018 7:15 pm

by nickstea

Calnago wrote:You may as well wait to see what Ceramic Speed has come up with for the Colnago C64. It should work on the same premise as the Wishbone solution in that it’s an option which replaces the Threadfit cups which come standard with the frame.
@cal - I have mad respect for your knowledge on all things Colnago, especially BB solutions. I would have just sent you a PM, however it does not seem that I am allowed to yet (anyway to get a hold of a mod so I can pM?)

Anyway, as you know I’m building up a gorgeous PLWH c60 at my local bike shop (which is a great shop and has a great reputation - Fairwheel bikes aka madcow on the forums). The build overall turned out fantastic with DuraAce, however I was expecting a HSC ceramic BB and when I went to go pick up the bike, it had a dura ace bb (that’s a fraction of the cost). Is DA 9100 a suitable alternative to HSC? Should I have considered ceramic speed BB? Will I notice a difference?
Thanks



Sent from my iPhone using Tapatalk

User avatar
Calnago
Posts: 5651
Joined: Sun Nov 07, 2010 9:14 pm

by Calnago

It's fine... you likely won't notice a difference while riding. I wouldn't worry about it. As long as it isn't creaking or develops a creak you're good. Nothing worse than a creaky bottom bracket. But that's largely a function of how well it was installed in the first place and whether a retaining compound and primer was used. Colnago actually recommends a dry install. I used a little Morgan Blue Aquaproof Paste just as a preventative antiseize agent. But do not use grease. Grease is your enemy when installing a pressfit BB... as it just facilitates movement and while it may "mask" the noise from the movement for a while, it's still allowing it, and that will eventually creak again, but worse, cause excessive wear on your BB shell. In Colnago's case, with the Threadfit BB, if something like that ever did cause excessive wear the solution is very simple, you just replace the Threadfit cups. Unlike a lot of other bare carbon shell frames where, if wear occurs, you're kind of stuck with it.
Colnago C64 - The Naked Build; Colnago C60 - PR99; Trek Koppenberg - Where Emonda and Domane Meet;
Unlinked Builds (searchable): Colnago C59 - 5 Years Later; Trek Emonda SL Campagnolo SR; Special Colnago EPQ

nickstea
Posts: 43
Joined: Sat Jan 27, 2018 7:15 pm

by nickstea

Calnago wrote:It's fine... you likely won't notice a difference while riding. I wouldn't worry about it. As long as it isn't creaking or develops a creak you're good. Nothing worse than a creaky bottom bracket. But that's largely a function of how well it was installed in the first place and whether a retaining compound and primer was used. Colnago actually recommends a dry install. I used a little Morgan Blue Aquaproof Paste just as a preventative antiseize agent. But do not use grease. Grease is your enemy when installing a pressfit BB... as it just facilitates movement and while it may "mask" the noise from the movement for a while, it's still allowing it, and that will eventually creak again, but worse, cause excessive wear on your BB shell. In Colnago's case, with the Threadfit BB, if something like that ever did cause excessive wear the solution is very simple, you just replace the Threadfit cups. Unlike a lot of other bare carbon shell frames where, if wear occurs, you're kind of stuck with it.
Thanks again for your wisdom!


Sent from my iPhone using Tapatalk

garypremo
Posts: 22
Joined: Wed Jul 27, 2016 9:09 pm
Location: San Francisco Bay Area

by garypremo

The Ceramicspeed customer service representative has apologized for the delay in updating the website to reflect the new T45 bottom bracket solution for Colnago Threadfit 82.5 bottom bracket equipped bikes. Here is the latest reply:

Hi Gary

I am sorry for the late reply and the bad news about you can´t see it yet.
Our website is working against adding this to the website. But I hope it will be up next week. This is being worked hard on by our webmaster.

Venlig hilsen / Best regards,

cid:image015.jpg@01D239DE.CE028400

Kim Sigkjær Jakobsen
Sales & Logistics Support

Noergaardsvej 3
DK-7500 Holstebro

Mobile: +45 25101425
Skype: Ksj_Ceramicspeed.com
2016 Colnago C60 PLWH 61 CM Traditional Geometry

by Weenie


Post Reply
  • Similar Topics
    Replies
    Views
    Last post