- I've put 3 different wheels in the frame with the same off center result.
- I've reversed said wheels (cassette towards NDS) to verify wheel dish with the same off center result.
- Wheel is also off center at the seat stays.
- Removed and swapped derailleur hangers to make sure it's not the hanger.
- I've checked for paint/clearcoat that might be interfering with the alignment and found no issues.
Based on this, I've concluded that the frame is misaligned and have stopped the build. Am I correct in this conclusion? If so, my understanding is that carbon does not bend or warp so the frame came this way from the factory and cannot be corrected. Therefore, I should be pushing for a replacement, yes? Thanks for any help and opinions as always!