Latex tube?

Discuss light weight issues concerning road bikes & parts.
Post Reply
Posts: 23
Joined: Sat Apr 23, 2016 2:25 am

by 53cxzero

Good day, I wanted to ask, if any one new what brand of latex tube Veloflex uses in there tubulars. I use Veloflex clinchers, and I am going to run latex tubes. I am just sorting out which to try, first. Thanks; Robert

Posts: 11
Joined: Sun Dec 31, 2017 3:14 am

by Sammutd88

Not sure, maybe they manufacture their own latex tubes to sew into their tubs. I can say however that I've had nothing but good performance from the pink Vittoria latex tubes.

by Weenie

User avatar
Posts: 2305
Joined: Mon Feb 19, 2007 3:44 am
Location: Canada

by LouisN

The latex tubes in tubulars are nowhere near latex tubes meant to be used with clincher tires. Vittoria latex tubes for tubulars weigh around 40g as the pink ones for clinchers weigh twice as much.
Louis :)

User avatar
Posts: 1736
Joined: Thu Jan 22, 2015 4:11 pm

by TonyM

I use mostly Vittoria and Vredestein latex tubes in my Veloflex. The Vittoria are much thicker than the Vredestein. Both work fine. Same tubes in my Vittoria tires. I use however only Vittoria latex tubes in my winter wheelset with Conti 4 seasons tires.

Posts: 23
Joined: Sat Apr 23, 2016 2:25 am

by 53cxzero

Great, sounds like, I will give the Vittoria tubes, a go! Thanks for your, input; Robert;

Posts: 159
Joined: Fri Mar 03, 2017 3:24 am

by C36

I attach a lab test done some time ago by the french magazine "le Cycle". Long story short, you have around 2x2W gains with latex over Butyl and surprisingly some pinch-resistance improvement.

I had to cut the picture to have them loaded but in short:
- power consumption for 30kmph
- puncture resistance: putting a needle into a tire-tube
- impact: dropping a tire-tube on an edge
- pressure loss: after a week (not any useful info...)

by Weenie

Post Reply
  • Similar Topics
    Last post