Steel, Stainless steel or Titanium ?

Discuss light weight issues concerning road bikes & parts.
DJT21
Posts: 144
Joined: Sun Mar 27, 2011 7:35 pm

by DJT21

dim wrote:
Thu Dec 28, 2017 12:43 pm
I'd steer clear of Titanium .... from what I have read, the welds have to be perfect .... some people report welds that crack after a while, especially around the bottom bracket where forces are huge

so go with lightweight steel .... I like these:
Jaegher Interceptor:
http://www.cyclist.co.uk/reviews/797/ja ... tor-review
Lol @ Jaegher. I wouldn't trust them to build a straight frame; quality seems to be lacking!

Titanium is fine if it's built by a good builder. Carl Strong is a name that springs to mind.

I would fear stainless steel would dent too easily. It's also tricky to manufacture (like Titanium) so you'd need to find a good builder.

by Weenie


ichobi
Posts: 616
Joined: Thu Jan 19, 2012 11:30 pm

by ichobi

If i go by value for money alone, i wouldn’t be riding etap. All my bikes would be fitted with tiagra or 105. There are more to bicycle than performance per dollar spent, to me anyway.

Anyhow, how about Condor bikes? They have some reasonably priced stainless and ti offering. The acciaio or super acciaio are race proven. You can also ask for custom geo with very little extra charge compared to most custom bike brands.


Sent from my iPhone using Tapatalk
Last edited by ichobi on Sun Dec 31, 2017 4:18 am, edited 1 time in total.

mattyNor
Posts: 273
Joined: Wed Mar 19, 2014 3:18 pm

by mattyNor

wheelsONfire wrote:Hey Stormur, let me know if you find someone building a custom frame for €1500.
I think it's a bit difficult actually.

Talking material, i would go for XCR tubing asking for a stiff front end and BB.
Or possibly Ti with same request. This should mean big diameter downtube and possibly toptube.
A tapered headtube rather than the 44mm I.D. (/50mm O.D.) they try to get away with.

I also would go for through axles and disc brake even if it was a road bike.

Stelbel have a nice bike, but it's 100/130 spacing.
I guess the UK builders ask less than the Italian.
Outside EU means a high taxing so i guess USA is out?
Stelbel will do any changes to their frames you request, mine was the first thru axle/flat mount Nina they did which then became their standard lol. I paid 3400Cad for frame (custom Columbus tubing but not xcr) and fork so not sure how that translates into Euro.

Sent from my SM-G930W8 using Tapatalk


stormur
Posts: 1156
Joined: Tue Aug 12, 2014 3:50 pm
Location: FIN

by stormur

There's plenty of options for 1500; Reilly, Orlowski, Rychtarski, Burls.. just to name the few. Both steel and ti. 2-3 hundred more ( can "survive" this ;) ) gives me fully custom geometry at some, for others it's even to much € ( Polish builders ) , it's not necessity for me, just it can't be "slopping"- this I can't stand.. or I do if it's "negative slope" .
From off the shelve it's enough money for DeRosa Corum f.e.( but not limited to ).

Disc brake is not an option. Already have disc braked bike ( under construction- weirdest bike I ever built for myself BTW ;) ) and don't need another: this I have doesn't have any issues caused by "modern" frames ( internal housing rattling, pressfit bb, flat mount, thru axles... And will serve as commuter and crosser.

I want road bike. Without +7-800g addtional weight ( to already not the lightest frame ) and ugly overpriced levers.
Drivetrain: it happened I have some DA9000 bits lying around ( was cheap, so bought it for "future" ) , choice has been made though( and I'm fortunate enough to say that Tiagra nor 105 won't happened to my bike :) if I couldn't say that it would be rather Veloce/ Centaur, for the same € performance is unbeatable in comparison).

Soldered frame ( steel ) is no bad thing. I would say it's better than welding at some point. Many framebuilders do it, succesfully.

Indeed, I've heard of issues with Ti bikes& welding; basically about all brands. Being not the lightest guy on bike it does somehow pushing me towards steel or alu ( 85kg, low cadence 1500W+ in short sprint ).

Another thing is you can read that "ti is for life" ( durability ? ) but "steel ride like no other" ;)

BTW Happy New Year !
Go to Heaven for the climate, Hell for the company.
Mark Twain


I can be wrong, and have plenty of examples for that ;)

Post Reply
  • Similar Topics
    Replies
    Views
    Last post