Madone 9 mechanical 9100

Discuss light weight issues concerning road bikes & parts.
Post Reply
Posts: 3
Joined: Mon Aug 04, 2014 2:28 pm

by popandmod

Looking at building up a new Madone 9 frameset with a mechanical 9100 group and a pair of the Enve aero handlebars.

I have heard recommendations against using a mechanical group with this frame but wasn't sure if that was related to the integrated bar/stem.

Im curious if anyone has experience of a similar setup.


Posts: 631
Joined: Wed Dec 29, 2010 10:22 pm
Location: Bristol uk

by markyboy

I had the madone 9 with that groupset on with no problems at all,i had the bontrager bars/stem combo.
The spacers that come with the frameset are designed to fit that combo,as all the wiring etc travels through the stem and so on.
I might be wrong but i cant see any other bar that would fit without the cables showing.
Ps bloody pig of a job to set up feeding all the internals.
Pinarello f8 sram etap
Eddy merckx 69 ultegra disc winter bike

by Weenie

Posts: 757
Joined: Wed Apr 11, 2012 3:40 am

by russianbear

Do you have the manual that comes with the bike? You should be able to find a pdf online if you don't. Trek did a good job outlining all the steps there for routing the internal cables, including how long the housing sections need to be in specific sizes etc.

Posts: 38
Joined: Sat Dec 14, 2013 6:53 am

by tnc1970

I had the opportunity of riding a Madone 9 with 9000 mechanical groupset and I was positively surprised: it worked flawlessly and front shifting was great.
Note: the bike is the personal ride of a friend who runs a bike shop & service and he's still cursing about all the work needed to get the thing assembled, so, get ready for some fun and follow very very carefully Trek instructions. As mentioned below, they are very detailed and -almost- dumb proof (of course, provided you don't skip a single step :P ).

Posts: 144
Joined: Thu Sep 29, 2011 1:19 am

by Fisherfreerider

It is no problem if you follow the steps. The people the have issues are the ones who think they are smarter than the manual.

by Weenie

Posts: 1384
Joined: Tue Sep 11, 2012 6:07 pm
Location: The Lone Star State

by FIJIGabe

I put my bike together, and took my time to do it right, the first time. It took me 4 days to do it, after work. Total time was 12 hours to build it, but I didn't have to thread anything through the bars, as the cable liners were factory installed. There is a good build series on YouTube that you can follow along. That plus the instructions provided me with everything I needed to complete the build.

Of note, the hardest part was getting everything situation in the headtube. The frame comes with liners all the way to the rear derailleur, so threading it through shouldn't be a problem.
Madone 9
Madone 5

Madone 4, Cobia. I own a lot of Treks.

Post Reply
  • Similar Topics
    Last post