Cervelo Carbon Stem

Discuss light weight issues concerning road bikes & parts.
Post Reply
notaero
Posts: 26
Joined: Sat Mar 10, 2012 1:00 pm

by notaero

Hi all, I'm looking for some more information on this product (my LBS cannot source it just yet). I'd like to see some detail on the top cap Di2 hole - my idea is to enlarge this slightly and run a hydraulic brake hose through here then down the top of my steerer tube next to the star nut down to the disc brake.
Unfortunately there are no photos showing the hole and I can't determine if I can fit the hose through here. My R3D (original model) fork allows the hose to run through the fork leg and out the steerer tube unobstructed.
The questions i need to answer are, can the hose handle the tight bend radius at the top of the steerer? (my garage test indicates it will do so with out kinking).
Is the groove in the top cap large enough to fit a 5.4mm diameter hose (or do I need to modify it)
What does the carbon stem weigh in 110mm ?
I'd appreciate if anyone who has access to this stem could take some photos.

by Weenie


Post Reply
  • Similar Topics
    Replies
    Views
    Last post