Apologies for the slow response, been ill so no desire to think about cycling!
Saddle Height is 816mm, and with drop do you mean saddle height to top of handlebar?
Build is, but this is without weight measurements!
Arundel Mandible Matt
Ceramicspeed Bottom Bracket PF4630
Ceramicspeed DT 240s disc, not oversized hub body wheelkit
Ceramicspeed OSPW SRAM RED 11-28
Continental R28 Supersonic 700 x 20 - 25C Presta 60mm valve inner tube
Enve Wheelset US - 3.4 SES DISC Clincher Shimano 11 CK Black Hub (Thru Axles 12/142)
DT Swiss 240 with Ceramic Bearings
SRAM Chainring Road 36t
SRAM Chainring Road Red B2 X-Glide 52T
SRAM RED ETAP HYD
SRAM RED22 Hollowpin 11 Speed Chain
Sram Red22 XG-1190 11-28 cassette
SRM THM Clavicula M3 175mm 52/36
Supacaz Bartape SUPER STICKY KUSH Black
K-Edge Aero Garmin Mount
Speedplay Metal Pedals
Carbon Ti Thru Axles
Ax-Lightness Stem 120mm
Ax-Lightness Handlebar 420mm
Prologo Zero C3 CPC Pas Nack SAddle 132
Still thinking of where I can save weight. Obvious place would be saddle, but I really like the Prologo ones. And I probably could go lighter wheels, with a different hub for example. But find the 3.4 solid as anythink for me, and I weigh 90kg, so wanted a wheelset I fully trust and have ridden before. I have a set of Lightweight Meilenstein non Disc on a different bike, but I don't travel with them, as I have broken a set before and they are a pain to get fixed or replaced. And the Parlee is suppose to be travel friendly for me. Kind of....travel friendly probably means something else for a lot of people.
So.. the Canton Ultimate Disc is just a wee bit porky at 8.1 kg including pedals, bottle cages and the Wahoo .. it's the 9.0 SL model on ultegra 6800 and the "ultegra level" no line hydraulic calipers and shifters. How much weight would it be possible to save by changing calipers and or shifters to 8000 or 9100 series? (:
I managed 7.2kg with pedals, bottlecages and Garmin Mount! Probably could have shaved 300gr off by keeping the carbon frame naked, but went a little crazy on paint!
Don‘t think I can save any more weight, unless I install a non-powermeter THM crank, and maybe I find a light isp saddle clamp!
Sent from my iPhone using Tapatalk
Nice bike! What's your saddle height and drop? And do you have a detailed build list?