2018 Cervelo R5 weight

[salesguy]

Just getting started building up this 2018 R5 rim brake.

834g with hanger, braze on for front mech & bottle cage bolts. Not included were rubber port covers, headset, etc.

803 as a bare frame

Planning to weigh all the parts as I built it up, and create a build thread as I go. This frame will be getting 9150 Di2 parts, Shimano Pro cockpit & saddle, Zipp 404 wheels and a quarq D-Four91 crankset with 9100 rings. I don't expect it to be much less than 16lbs but it should be trouble free and a great ride.

[lowside67]

What is the frame size?

-Mark

[NYCPrynne]

I have a 54 cm 2014 R5 with Dura-ace and Zipp 404 FC clinchers that runs 6.7 kg, so I think you will be able to get under 6.8 kg.

[mrlobber]

Nice to see the weight +/- corresponding to stated weights!

[salesguy]

What is the frame size?

-Mark

56cm

Sorry for leaving out that important detail!

[dalex]

Good weight. Have you weighed the fork?

[salesguy]

Yes, 328g uncut

I'll post weights of every single part on the build thread.

So far the heavier items are:

Seatpost: 212g
PRO Saddle: 152g
9100 Pedals: 234g

Coming in pretty light:
9150 Front Der.: 103g
9150 Rear Der.; 196g
PRO Vibe Stem: 143g (the new model is very nice with great finish and dark anodized Ti hardware. Very nice part.
PRO Carbon UD cages: 21g (without bolts)