needing help Quarq cranks Sram and rotor, swapping them between bikes.

Discuss light weight issues concerning road bikes & parts.
Post Reply
charlie0
Posts: 1
Joined: Sat Sep 09, 2017 7:04 am

by charlie0

I have a Rotor 3D quarq and SRAM Red quarq. I prefer the rotor but given that I'm running SRAM cranks on my TT and winter bike and want to be able to swap the quarq around. Any advice will be appreciated.
Last edited by charlie0 on Thu Nov 02, 2017 1:41 am, edited 2 times in total.

alcatraz
Posts: 568
Joined: Mon Aug 29, 2016 11:19 am

by alcatraz

So swap them around, whats the problem? :D

by Weenie


Greg66
Posts: 242
Joined: Mon Sep 26, 2005 8:06 pm

by Greg66

The Rotor marries to the BB it is sitting in. The SRAM marries to the BB it is sitting in (GXP, BB30?).

If you want to swap them, you need to swap the BBs. Or, if you’ve got Press fit in one frame and threaded in the other, you need some new bottom brackets.

I think.

alcatraz
Posts: 568
Joined: Mon Aug 29, 2016 11:19 am

by alcatraz

The OP never specified axle and bb standards. Please do so that we may help you better.

/a

Post Reply
  • Similar Topics
    Replies
    Views
    Last post