Thread together BB for BBRight

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

Post Reply
morganb
Posts: 732
Joined: Wed Mar 15, 2017 5:30 pm

by morganb

Are there any thread together options that will work for BBRight? Using 3D+ cranks. All of them seem to be PF30 and I imagine wouldn't work as intended in a wider shell. The Rotor BB in my S3 is creaking badly and always felt bound up from the beginning.

User avatar
bikerjulio
Posts: 1900
Joined: Fri Dec 11, 2009 10:38 pm
Location: Welland, Ontario

by bikerjulio

There's sometimes a buggy.
How many drivers does a buggy have?

One.

So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.

http://www.youtube.com/watch?v=GekiIMh4ZkM

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



morganb
Posts: 732
Joined: Wed Mar 15, 2017 5:30 pm

by morganb


Thank much, I already have the Wheels BB tool so this is doubly good.

SMITHERS
Posts: 114
Joined: Wed Apr 21, 2004 7:43 am

by SMITHERS


dlud
Posts: 2
Joined: Fri Feb 08, 2013 4:02 pm

by dlud

I use the Wheels Mfg screw together bb on my Cervelo P5 with a Rotor 3D+. Love it. Easy to install and so far it has resolved the bearing issues that I had with the pressfit bb.

audiophilitis
Posts: 479
Joined: Sun Jul 29, 2012 12:49 am

by audiophilitis

https://fairwheelbikes.com/thm-road-bottom-brackets/

These are BBRight spec and thread together. Not sure if they work with 3D cranks but worth looking into.

Stueys
Posts: 673
Joined: Sat Nov 22, 2014 1:12 pm

by Stueys

Not thread together but I put a cbear bb in my r5 after struggling with the rotor ones and it’s been absolutely rock solid

hodag1977
Posts: 12
Joined: Fri Dec 25, 2015 12:50 am

by hodag1977

SMITHERS wrote:This should work for you as well:

https://www.endurobearingsonline.com/co ... 5-bearings

I have this same BB on my Cervelo R3 and it's been great. Nice thing about the xd-15 is it's easy to remove the ball bearings from the cups, clean, and lubricate - in my opinion, this is by far the biggest cause of noisy bottom brackets, i.e. dirty, wet, unlubricated bearings. I also wrap some teflon tape around the cups, along with some Morgan Blue Aquaproof Paste. The Enduro website/Youtube channel has a video on removing and cleaning the bearings on an xd-15 BB.

stevod
Posts: 32
Joined: Tue Aug 18, 2015 8:09 am

by stevod

I'm using the Wheels BBright BB:
http://wheelsmfg.com/bottom-brackets/bb ... black.html

No problems at all.

S

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



kzy090
Posts: 20
Joined: Thu Aug 23, 2018 3:37 pm

by kzy090

Rotor and Enduro have those, too.

Post Reply