Page 1 of 1

Thread together BB for BBRight

Posted: Fri Sep 22, 2017 12:31 pm
by morganb
Are there any thread together options that will work for BBRight? Using 3D+ cranks. All of them seem to be PF30 and I imagine wouldn't work as intended in a wider shell. The Rotor BB in my S3 is creaking badly and always felt bound up from the beginning.

Re: Thread together BB for BBRight

Posted: Fri Sep 22, 2017 12:52 pm
by bikerjulio

Re: Thread together BB for BBRight

Posted: Fri Sep 22, 2017 12:52 pm
by Weenie

Re: Thread together BB for BBRight

Posted: Fri Sep 22, 2017 12:55 pm
by morganb

Thank much, I already have the Wheels BB tool so this is doubly good.

Re: Thread together BB for BBRight

Posted: Fri Sep 22, 2017 3:15 pm
by SMITHERS

Re: Thread together BB for BBRight

Posted: Sat Sep 23, 2017 12:34 am
by dlud
I use the Wheels Mfg screw together bb on my Cervelo P5 with a Rotor 3D+. Love it. Easy to install and so far it has resolved the bearing issues that I had with the pressfit bb.

Re: Thread together BB for BBRight

Posted: Sat Sep 23, 2017 1:11 am
by audiophilitis
https://fairwheelbikes.com/thm-road-bottom-brackets/

These are BBRight spec and thread together. Not sure if they work with 3D cranks but worth looking into.

Re: Thread together BB for BBRight

Posted: Sat Sep 23, 2017 5:08 pm
by Stueys
Not thread together but I put a cbear bb in my r5 after struggling with the rotor ones and it’s been absolutely rock solid

Re: Thread together BB for BBRight

Posted: Wed Sep 27, 2017 12:53 am
by hodag1977
SMITHERS wrote:This should work for you as well:

https://www.endurobearingsonline.com/co ... 5-bearings

I have this same BB on my Cervelo R3 and it's been great. Nice thing about the xd-15 is it's easy to remove the ball bearings from the cups, clean, and lubricate - in my opinion, this is by far the biggest cause of noisy bottom brackets, i.e. dirty, wet, unlubricated bearings. I also wrap some teflon tape around the cups, along with some Morgan Blue Aquaproof Paste. The Enduro website/Youtube channel has a video on removing and cleaning the bearings on an xd-15 BB.

Re: Thread together BB for BBRight

Posted: Wed Sep 27, 2017 12:53 am
by Weenie

Re: Thread together BB for BBRight

Posted: Wed Sep 27, 2017 6:09 pm
by stevod
I'm using the Wheels BBright BB:
http://wheelsmfg.com/bottom-brackets/bb ... black.html

No problems at all.

S