Brake pads for Lightweight Meilenstein
Moderator: robbosmans
-
- Posts: 103
- Joined: Sun Dec 04, 2016 10:26 am
Hiya,
need a little bit of help here... got some Meilensteins a while back and ran them for about 200 km with some Swiss Stop Black Princes - given the short nature of riding them, I can already see "fade" on the brake track.
Checking some Syncros RR1.0s that I have (Reynolds rims) that I ran with the Swiss Stops for like 3 000 km, the brake surface is completely polished and it looks like several layers of carbon have disappeared.
This leads me to think that the Swissstops are eating through my wheels?
I am looking at pads to use with the Lightweights that won't eat through the wheels... thinking about ZIPP Platinum, Reynolds Cryo? Of course, there are the OEM Lightweight pads, FlashPro and RacePRo, but they are made by Swissstop, so I am a little concerned it would just be more of the same...
Wheel "friendliness" is first place, then dry stopping power... not really concerned about wet stopping power, I try not to ride my climber's bike too much in the rain...
Thanks!
need a little bit of help here... got some Meilensteins a while back and ran them for about 200 km with some Swiss Stop Black Princes - given the short nature of riding them, I can already see "fade" on the brake track.
Checking some Syncros RR1.0s that I have (Reynolds rims) that I ran with the Swiss Stops for like 3 000 km, the brake surface is completely polished and it looks like several layers of carbon have disappeared.
This leads me to think that the Swissstops are eating through my wheels?
I am looking at pads to use with the Lightweights that won't eat through the wheels... thinking about ZIPP Platinum, Reynolds Cryo? Of course, there are the OEM Lightweight pads, FlashPro and RacePRo, but they are made by Swissstop, so I am a little concerned it would just be more of the same...
Wheel "friendliness" is first place, then dry stopping power... not really concerned about wet stopping power, I try not to ride my climber's bike too much in the rain...
Thanks!
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 103
- Joined: Sun Dec 04, 2016 10:26 am
Just realized this is better off in the wheels section... can mods please move? Sorry for the inconvenience.
Unless you letting a lot of grit get onto the pads ot ride the vrakes every descent then you shouldn't see brake track wesr that early. I have meilenstein and i use campy carbon pads for better btaking petformance.
Evo 4.9kg SL3 6.64kg Slice RS 8.89kg viewtopic.php?f=10&t=110579" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;
I just did some work on a guys bike, with Obermayers. Put some new OEM Lightweight pads on. That's what I'd use. The braking seemed very good on the test ride I went on with them. I use Campy red pads on my Boras, but given how good the Lightweight OEM pads were on the Lightweights, I wouldn't go switching them out. If the recommended pads work well, then use 'em.
Colnago C64 - The Naked Build; Colnago C60 - PR99; Trek Koppenberg - Where Emonda and Domane Meet;
Unlinked Builds (searchable): Colnago C59 - 5 Years Later; Trek Emonda SL Campagnolo SR; Special Colnago EPQ
Unlinked Builds (searchable): Colnago C59 - 5 Years Later; Trek Emonda SL Campagnolo SR; Special Colnago EPQ
I have been using cork pads for years, mostly Zipp cork but have not found a big difference with other cork pads. The wheels show no wear and you might be surprised at how long the pads last.
I use them because I prefer the braking modulation but they are great for wheel wear as well.
Reduced braking in the rain but I am not usually riding in the rain and if it rains, I am not pushing the pace.
I use them because I prefer the braking modulation but they are great for wheel wear as well.
Reduced braking in the rain but I am not usually riding in the rain and if it rains, I am not pushing the pace.
- LePouletTrapu
- Posts: 27
- Joined: Tue Nov 13, 2007 1:19 pm
- Location: Scotland, UK
I had a similar problem on a set of gen 3 lightweights with the none lightweight Swisstops eating the rims, and the feedback from lightweight who were very helpful was that I should have been using the lightweight pads. I switched to the none lightweight pads when I read somewhere that they were just the normal Swisstop carbon pads in a different colour but evidently this was not the case. It is worth mentioning I never had the problem on my gen 2 wheels using normal Swisstop pads so they may have changed something in the rims which made it more important to use the correct pads.
Sent from my SM-G935F using Tapatalk
Sent from my SM-G935F using Tapatalk
+1
Only LW pads with LWs. I have used Corima for a few times in the past, which are fine pads in the wet and don't eat rims, but LW Swisstops were just perfect.
Only LW pads with LWs. I have used Corima for a few times in the past, which are fine pads in the wet and don't eat rims, but LW Swisstops were just perfect.
I've had both LW Meilensteins and the Gipfelsturm. The Meilensteins were 10-speed only, so I sold those and am yet to replace them. The Gipfelsturm are great for climbing and are unaffected by side-winds too.
I did originally use the LW pads that came with them, but found braking very 'grabby'. So I tried the Zipp Cork pads and they were great, no grabbiness, but slightly less braking power, which I thought was a lot safer for me.
Came across the Cole Pink brake pads for carbon rims and I'm currently riding with these and they seem to be very good. Modulate well, with good stopping power too. Using the newest DA 9100 callipers, very powerful! Braking surfaces on the Gipfelsturm seem unaffected so far.
I have 2 sets of the LW brake pads, one used and one unopened. Might switch back to compare one day !
I did originally use the LW pads that came with them, but found braking very 'grabby'. So I tried the Zipp Cork pads and they were great, no grabbiness, but slightly less braking power, which I thought was a lot safer for me.
Came across the Cole Pink brake pads for carbon rims and I'm currently riding with these and they seem to be very good. Modulate well, with good stopping power too. Using the newest DA 9100 callipers, very powerful! Braking surfaces on the Gipfelsturm seem unaffected so far.
I have 2 sets of the LW brake pads, one used and one unopened. Might switch back to compare one day !
Riding my road bikes around Eryri
http://www.strava.com/athletes/keith_robertson" onclick="window.open(this.href);return false;
http://www.strava.com/athletes/keith_robertson" onclick="window.open(this.href);return false;
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
I've not seen any wear with Black Prince in the latest formulation, and the braking is excellent.
Cysco Ti custom Campy SR mechanical (6.9);Berk custom (5.6); Serotta Ottrott(6. ; Anvil Custom steel Etap;1996 Colnago Technos Record