Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Sun Oct 22, 2017 1:28 pm

All times are UTC+01:00





Post new topic  Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Rim tape check
PostPosted: Wed Aug 23, 2017 5:16 pm 
Offline

Joined: Sun Jun 25, 2017 12:21 pm
Posts: 72
Hello,

Just a quick question on rim tape fit. My rims are the wide kind with 19mm inner diameter. I got this 16mm Velox tape on but I am not sure if it may be a bit small. Should I go 19mm? or would that be too wide and make it difficult for cotton beads to sit properly? It is covering the whole gutter and all the spoke holes (which are thankfully not offset) but I wonder if there is a risk the tape may lift or slide and allow the latex tube to access the spoke holes.

Image attached.

Thanks in advance.


Attachments:
rim tape.jpg
rim tape.jpg [ 8.62 KiB | Viewed 395 times ]
Top
   
 Post subject: Re: Rim tape check
PostPosted: Wed Aug 23, 2017 5:18 pm 
Offline
in the industry

Joined: Fri Dec 07, 2012 8:34 pm
Posts: 339
Location: North Carolina
if it sufficiently covers all the spoke holes you should be fine.

_________________
The New: BH http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=117760


Top
   
 Post subject: Re: Rim tape check
Posted: Wed Aug 23, 2017 5:18 pm 


Top
   
 
 Post subject: Re: Rim tape check
PostPosted: Wed Aug 23, 2017 6:12 pm 
Offline

Joined: Sun Jun 25, 2017 12:21 pm
Posts: 72
wpccrunner wrote:
if it sufficiently covers all the spoke holes you should be fine.


Hi there. There would be about 2mm of tape beyond each side of the hole. Enough? I fear for trying to get a wider one in case it raises the bead enough for it not to sit properly.


Top
   
 Post subject: Re: Rim tape check
PostPosted: Wed Aug 23, 2017 6:18 pm 
Offline

Joined: Tue May 23, 2006 9:39 pm
Posts: 1027
the tire bead should fit regardless of the tape...since it goes up and into the lip of the rim when inflated.

on a few wheels, i use the veloplugs, which weigh less overall and only covers the holes so the tube doesn't blow through them.

_________________
- AX Lightness Vial EVO D + DA9070 + Enve SES 3.4 carbon hubs
- Parlee Altum + DA9150 + Enve SES 4.5 carbon hubs
- Parlee ESX + DA9070 + THM SRM PM + Enve SES 6.7 CK hubs
- Independent Fabrication Ti FLW + Campy SR11 + Enve 3.4 CK hubs


Top
   
 Post subject: Re: Rim tape check
PostPosted: Wed Aug 23, 2017 8:29 pm 
Offline

Joined: Wed Jan 22, 2014 11:48 am
Posts: 2369
Location: Vienna Austria
I run 2 wraps of tubeless type tape, makes fitting tires much easier.


Top
   
 Post subject: Re: Rim tape check
PostPosted: Thu Aug 24, 2017 7:22 am 
Offline

Joined: Thu Jul 19, 2012 6:09 pm
Posts: 1102
Location: Loveland, CO
Marin wrote:
I run 2 wraps of tubeless type tape, makes fitting tires much easier.


+1. I also use Veloplugs if the spoke hole is the correct diameter and shape for Veloplugs. Veloplugs is the best and lightest solution. Tubeless tape is good too but at twice the weight of Veloplugs. Some rims have a curved inner rim shape and Veloplugs won't work.


Sent from my iPhone using Tapatalk


Top
   
 Post subject: Re: Rim tape check
PostPosted: Thu Aug 24, 2017 7:27 am 
Offline

Joined: Sat May 24, 2014 12:09 pm
Posts: 756
pdlpsher1 wrote:
Marin wrote:
I run 2 wraps of tubeless type tape, makes fitting tires much easier.


+1. I also use Veloplugs if the spoke hole is the correct diameter and shape for Veloplugs. Veloplugs is the best and lightest solution. Tubeless tape is good too but at twice the weight of Veloplugs. Some rims have a curved inner rim shape and Veloplugs won't work.


Sent from my iPhone using Tapatalk


1 run of 19mm blue Schwalbe tubeless rim tape is only 6 gr, so not a lot more than veloplugs. Ok, maybe the double of weight, but that's still only 3 gr :mrgreen: But you are right, veloplugs is a lot lighter than 90% of the rimstapes found on stock wheels. Roval rim tape was almost 25gr per wheel :shock:

_________________
Canyon Ultimate CF SLX 2013
Scott Addict Orica Greenedge
Canyon Endurace CF SLX


Top
   
 Post subject: Re: Rim tape check
Posted: Thu Aug 24, 2017 7:27 am 


Top
   
 
 Post subject: Re: Rim tape check
PostPosted: Thu Aug 24, 2017 11:56 am 
Offline

Joined: Wed Jan 22, 2014 11:48 am
Posts: 2369
Location: Vienna Austria
I'm actually only using 1 run, but seeing the tape deform into the nipple holes I'll use 2 in the future on non-weenie wheels ;)


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 8 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Tape instead of hoods?

in Road

whydobearsxplod

13

1169

Fri Sep 29, 2017 4:46 pm

whydobearsxplod View the latest post

There are no new unread posts for this topic. TechFlex as bar tape experiment

in Road

WannabeWeenie

6

1306

Thu Jan 12, 2017 2:36 am

WannabeWeenie View the latest post

There are no new unread posts for this topic. Favorite bar tape for aerobars

in Road

Kurets

8

858

Sat Jul 08, 2017 11:34 am

Juanmoretime View the latest post

There are no new unread posts for this topic. Suggestions for finishing bar tape ?

[ Go to page: 1 2 ]

in Road

wobbly

22

1615

Sat Jul 15, 2017 6:11 am

Nefarious86 View the latest post

There are no new unread posts for this topic. Attachment(s) Silva chrome bar tape

in Road

ksy8828

4

840

Tue May 09, 2017 2:51 pm

Stolichnaya View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: alorast, Baidu [Spider], Erwin, Google [Bot], jlok, jobvisser, simplemind, uraz and 27 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited