Rim brake thru-axle frames/bikes ?

Discuss light weight issues concerning road bikes & parts.
Post Reply
ooo
Posts: 443
Joined: Sat May 21, 2016 12:59 pm

by ooo

Anyone seen road or mtb frames/bikes with 142x12 rear dropouts (or QR/Thru-axle replaceble dropouts) and rim brake mounts (or both rim+disc mounts)?
'

FIJIGabe
Posts: 1382
Joined: Tue Sep 11, 2012 6:07 pm
Location: The Lone Star State

by FIJIGabe

No, and I don't think you're not going to, because the axle that would work on the bike is only 130mm, rather than 135 or 142.
Madone 9 https://goo.gl/7UwZpV
Crockett https://goo.gl/f5PdCN
Madone 5 https://goo.gl/cMdyFo

Madone 4, Cobia. I own a lot of Treks.

by Weenie


bremerradkurier
Posts: 199
Joined: Mon Jun 13, 2016 4:18 pm

by bremerradkurier

Could be somewhat useful for an urban singlespeed bike, especially with a security keyed socket for the axles and super wide flange spacing for a strong rear wheel.

FIJIGabe
Posts: 1382
Joined: Tue Sep 11, 2012 6:07 pm
Location: The Lone Star State

by FIJIGabe

I think we'll eventually see wider rear spacing (be it 142 for rim brake or 148 Boost for disc), but that would be for purposes of more gears in the back.
Madone 9 https://goo.gl/7UwZpV
Crockett https://goo.gl/f5PdCN
Madone 5 https://goo.gl/cMdyFo

Madone 4, Cobia. I own a lot of Treks.

User avatar
kavitator
Posts: 1136
Joined: Sun Sep 21, 2008 9:07 pm
Location: Slovenia---that forest land

by kavitator

Specialized SL6????? :roll:

bm0p700f
in the industry
Posts: 3369
Joined: Sat May 12, 2012 7:25 pm
Location: Glermsford, Suffolk U.K
Contact:

by bm0p700f

148x12 makes alot of sense for road bikes. Same with boost for the front.

wingguy
Posts: 3505
Joined: Thu Mar 08, 2012 11:43 pm

by wingguy

kavitator wrote:Specialized SL6????? :roll:

Umm, no? :roll:

The Wilier Cento10NDR has both direct mount rim and flat mount disc brakes on each frame and swappable dropouts for QR and Thru-axles. Probably some steel or Ti builders would make one for you as well.

But as stated how will you get rim brake hubs to fit thru axle spacing? Or would you lace a rim brake rim to a disk hub? :noidea:

wingguy
Posts: 3505
Joined: Thu Mar 08, 2012 11:43 pm

by wingguy

bm0p700f wrote:148x12 makes alot of sense for road bikes.

You think? I think componentry makers would be reluctant to increase Q-factor on road cranks and without doing that most chainsets don't have the space to shift the chainrings 3mm outboard without the crankarm ripping the front mech off.

User avatar
deano87
Posts: 60
Joined: Tue Oct 17, 2017 4:18 am
Location: Melbourne, Australia

by deano87

wingguy wrote:
bm0p700f wrote:148x12 makes alot of sense for road bikes.

You think? I think componentry makers would be reluctant to increase Q-factor on road cranks and without doing that most chainsets don't have the space to shift the chainrings 3mm outboard without the crankarm ripping the front mech off.

please check your PM's!
The Journey is more important than the Destination!

bm0p700f
in the industry
Posts: 3369
Joined: Sat May 12, 2012 7:25 pm
Location: Glermsford, Suffolk U.K
Contact:

by bm0p700f

i am happy to loose the FD.

by Weenie


Post Reply
  • Similar Topics
    Replies
    Views
    Last post