Crown race reducer problem

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

Post Reply
saito
Posts: 2
Joined: Tue Aug 15, 2017 4:31 am

by saito

I have Enve Gravel Road Disc Fork and Lynskey Sportive Disc Frame. Enve fork steerer size is 1-1/4" to 1-1/8" taper. Appropriate head set for the Lynskey head tube is Cane Creek IS 42 top + IS 52 bottom. Crown race size for IS 52/40 is 1.5". Unfortunately Cane Creek does not provide 1.5 to 1-1/4 crown race reducer. How can I do to install Enve fork into Lynskey frame?

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



saito
Posts: 2
Joined: Tue Aug 15, 2017 4:31 am

by saito

I found Cane Creek crown race reducer at Bike24 website. "Cane Creek 110 Crown-Race 52/33mm 1 1/2 to 1 1/4 Inches for EC, ZS, IS"

cassard
Posts: 97
Joined: Wed Jan 24, 2018 12:31 am

by cassard

Hi guys !

I have the exact same problem but with chris king. Stinner recommand the Inset 7 but the inner width is 1 1/2 for the lower piece. the fork is a 1 1/4. do you think the cane creek reducer would work or I have to contact chris king ?

Post Reply