Power Meter options for Canyon Endurance

Discuss light weight issues concerning road bikes & parts.
Post Reply
cockera
Posts: 3
Joined: Mon Jul 10, 2017 4:49 pm

by cockera

I'm currently looking for a power meter solution for my Canyon Endurace CF SLX 8.0. Ideally i was looking for a single sided crank based meter such as stages or 4iii, but there is insufficient clearance between the crank arm and chainstay, so i need an alternative. I'm not a big fan of pedal based meters, having owned PowerTap P1's before. Can anyone recommend a crank or bottom braket based system that is cost effective and light? Thanks

by Weenie


Delorre
Posts: 870
Joined: Sat May 24, 2014 12:09 pm

by Delorre

cockera wrote:I'm currently looking for a power meter solution for my Canyon Endurace CF SLX 8.0. Ideally i was looking for a single sided crank based meter such as stages or 4iii, but there is insufficient clearance between the crank arm and chainstay, so i need an alternative. I'm not a big fan of pedal based meters, having owned PowerTap P1's before. Can anyone recommend a crank or bottom braket based system that is cost effective and light? Thanks



Who told you that? I own one, with Stages (gen 2), no problem at all. You end up with minimum of 2 à 3 mm of clearance :thumbup:

cockera
Posts: 3
Joined: Mon Jul 10, 2017 4:49 pm

by cockera

Thanks Delore, if that's the case then brilliant. According to Stages support, it requires 8-9mm clearance, which is cutting it fine. I'm running Ultegra 6800, what crank do you have? Cheers

Delorre
Posts: 870
Joined: Sat May 24, 2014 12:09 pm

by Delorre

cockera wrote:Thanks Delore, if that's the case then brilliant. According to Stages support, it requires 8-9mm clearance, which is cutting it fine. I'm running Ultegra 6800, what crank do you have? Cheers


See my signature, DA9000 cranckset. If you want, I can try to post a pic this evening.

cockera
Posts: 3
Joined: Mon Jul 10, 2017 4:49 pm

by cockera

Thanks - Nice set up. Don't worry about posting a pic. The Ultegra 6800 crank is almost identical in shape to the DA9000, so hopefully there will be just enough clearance. I've ordered one now, so worse case scenario it doesn't fit and i will have to return it.... PS. i've also got a 2013 Ultimate CF SLX - love that bike too... Thanks for your help...A

gewichtweenie
Posts: 148
Joined: Fri Sep 25, 2015 3:12 pm

by gewichtweenie

do the aaa battery test. (or is it aa?). its almost exactly same width as the 4iii

by Weenie


Ginsterdrz
Posts: 34
Joined: Sun Jul 08, 2012 1:16 pm

by Ginsterdrz

4iiii will plonk your power pod anywhere you want it on the crank. Do the AAA battery test, mark up your crank as per site info and you're done. They did that for both Canyons, the latest being the Endurace. It's only 2/3mm nearer the pedal. I spat with Stages-they don't like the UK'S wet weather-PITA.
4iiii have been completely different-no drop outs/issues/problems with all 3, just reliable dependable data. 4iiii support is superb.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post