Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Mon Dec 11, 2017 4:57 am

All times are UTC+01:00





Post new topic  Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Sun Jul 09, 2017 11:33 pm 
Offline

Joined: Sun May 25, 2008 10:37 am
Posts: 113
I came across the Giro REPUBLICâ„¢ LX REFLECTIVE shoes and I was really impressed.

One slight issue - they are 2 bolt only. Does anyone have any experience of converting these kind of shoes for use with (say) Time cleats?

Specific experience would be amazing, but general advice on 2 versus 3 bolt cleats would also be great

Specific shoe - http://www.giro.com/eu_en/products/men/ ... ctive.html


Top
   
Posted: Sun Jul 09, 2017 11:33 pm 


Top
   
 
PostPosted: Fri Jul 28, 2017 3:01 am 
Offline

Joined: Fri Jul 28, 2017 12:34 am
Posts: 30
As far as I know, you can use adaptors to convert from 3 bolt shoes to 2 bolt cleats, but not the other way around.

If you really like the shoes, why not buy some pedals to go with them, like some Shimano SPDs or (if you really love Time) Time ATACs?


Top
   
PostPosted: Fri Jul 28, 2017 3:24 pm 
Offline

Joined: Thu Sep 05, 2013 3:29 pm
Posts: 420
@CycloTron: I'm assuming that he doesn't want 2-bolt due to the lower foot stability of most 2 bolt setups, and their reliance on tread/pedal tolerances to prevent side to side rocking.

On the plus side, it looks like the Republics use replaceable, bolt on, tread sections. With that kind of setup, you can shim the tread sections to create the closest possible fit with the pedal, but not so close as to restrict float. As the tread wears, you can add more shims to "keep it tight", which is a weakness of most 2 bolt setups with permanent shoe tread sections.

If he has other reasons to go 3 bolt, then the shoes can likely be redrilled, although you'd want to mock-up a Time 3 bolt cleat and pedal on the sole to check the spacing from the tread blocks and make sure there isn't interference. I've drilled out 3 bolt cleat shoes with a 2nd bolt pattern, in order to move the cleats further back than would otherwise be possible. It's really pretty easy. Just go through the standard measures that you'd use to determine proper foot placement over the pedal to figure out where you want the cleat, then use the cleat as a template to mark the appropriate spots to drill on the sole. It helps if you drill some little "pilot holes" with a dremel, or at the very least, a small drill bit, before enlarging to accomodate your time cleat bolts. Then pick up a couple barbed "T-nuts" from the hardware store in the appropriate size for the inside of the shoe. The barbs will bite into the midsole, preventing them from spinning, once you start to tighten them. Depending on your insole that you place on top, and how soft the midsole is, you likely won't even feel them, as they tend to sink into any sort of paper fiber lasting board that many shoe companies use. If you find that they still stick up and it bothers your feet, you can remove them, and gently create a recess in the midsole, using a grinding stone on the dremel, in order to countersink the T-nut.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 3 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. What does a DT RWS Thru-Bolt do?

in Road

Valbrona

3

524

Mon Mar 27, 2017 2:28 am

Valbrona View the latest post

There are no new unread posts for this topic. Felt ar bolt questions!

in Road

FredrikE

0

308

Fri Apr 14, 2017 8:10 pm

FredrikE View the latest post

There are no new unread posts for this topic. B.O.R Chainrings 4 bolt Shimano

in Road

itsacarr

0

318

Tue May 23, 2017 11:22 pm

itsacarr View the latest post

There are no new unread posts for this topic. Red 22 ( 2016) b-bolt issue (?)

in Road

stormur

5

437

Wed Sep 27, 2017 6:15 pm

stormur View the latest post

There are no new unread posts for this topic. Where to buy a black ti tapered M7x15 bolt?

in Road

spliid

8

675

Mon May 22, 2017 5:16 pm

spliid View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Attermann, Baidu [Spider], caballero, Google Adsense [Bot], KarlC, wrcompositi and 35 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited