2017 Cannondale SuperSix Evo Hi-Mod with Di2
Moderator: robbosmans
I've just had one of these built up and am looking for something to fill the holes around the bottom bracket where the cable guides no longer are..the retailer tells me Cannondale don't offer anything that does this!
Has anybody bought a complete SuperSix with Di2? What does that come with?
Picture attached of the area I'm talking about.
Any help greatly appreciated.
Sent from my SM-G935F using Tapatalk
Has anybody bought a complete SuperSix with Di2? What does that come with?
Picture attached of the area I'm talking about.
Any help greatly appreciated.
Sent from my SM-G935F using Tapatalk
Put some 3M car paint protecion tape (or helicopter tape) on it. Just leave the drain hole, otherwise, you BB will be drawning!
Current bikes:
Scott Addict Premium Disc 2018
Scott Addict Orica Greenedge 2015
Retired:
Canyon Endurace CF SLX 2016
Canyon Ultimate CF SLX 2013
Scott Addict Premium Disc 2018
Scott Addict Orica Greenedge 2015
Retired:
Canyon Endurace CF SLX 2016
Canyon Ultimate CF SLX 2013
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 256
- Joined: Fri Dec 04, 2015 11:18 pm
- Location: the OC, CA
I use 3M clear tape for mine.
Park Tool GP2 Tire Patch is cheap and easy to apply...
Rikulau V9 DB Custom < BMC TM02 < Litespeed T1sl Disc < Giant Propel Advanced SL Disc 1 < Propel Adv < TCR Adv SL Disc < KTM Revelator Sky < CAAD 12 Disc < Domane S Disc < Alize < CAAD 10
My SuperSix Himod came with the holes open and I have left them that way. No problems yet after 9 months. I think that they act as drain holes for any water that gets into the BB via the seat tube or whatever. I had one bike that had a sealed BB shell and ended up with about 1/4" of water inside of it after riding in the rain and water getting in from somewhere. So, I added a drain hole and the problem went away. All the bearings are sealed on the inside as well as the outside.
Would you cover your driveway drainage?
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
I'm currently converting a 2017 SuperSix from mechanical to 12sp Di2 for a customer of mine.
I've purchased the specific Di2 rear hanger and that looks good for the rear derailleur. I also purchased the Di2 grommet kit from Cannondale spares in the UK but am a little underwhelmed by what was included. There are no grommets/bungs for the cable guides on the underside of the downtube or the longer slot under the BB when the front mech cable guide is removed Is helicopter tape still the best soloution to cover the open frame holes?
I've purchased the specific Di2 rear hanger and that looks good for the rear derailleur. I also purchased the Di2 grommet kit from Cannondale spares in the UK but am a little underwhelmed by what was included. There are no grommets/bungs for the cable guides on the underside of the downtube or the longer slot under the BB when the front mech cable guide is removed Is helicopter tape still the best soloution to cover the open frame holes?