Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Fri Dec 15, 2017 2:00 am

All times are UTC+01:00





Post new topic  Reply to topic  [ 11 posts ] 
Author Message
PostPosted: Tue May 09, 2017 10:35 am 
Offline
User avatar

Joined: Mon Sep 07, 2015 1:02 am
Posts: 251
Location: Brisbane
Looking for a photo (can't find anything!) of the bottom of a CX Zero Evo.
Got a new frameset, didn't come with a cable guide.

Do these have custom cable bb guides or just a standard one?


Found this - off a cx zero disc. Same as on the rimbrake?


Attachments:
cx zero.jpg
cx zero.jpg [ 3.37 KiB | Viewed 623 times ]

_________________
Chapter 2 Tere
Top
   
PostPosted: Tue May 09, 2017 3:42 pm 
Offline
User avatar

Joined: Sat Apr 23, 2016 4:10 pm
Posts: 109
Location: Ottawa, ON
Image

Here you go! Not the best angle, but I confirm it’s the same custom BB cable guide on my rim brake frame. Sorry yours didn’t include the guide.

PS - That “Made in Taiwan” sticker was the first thing to go. Must have saved 0.01 g! :D

_________________
Mom: He was very sickly until he started riding around on that bicycle.
Dad: Yeah... well... now his body’s fine, but his mind is gone.


Top
   
Posted: Tue May 09, 2017 3:42 pm 


Top
   
 
PostPosted: Tue May 09, 2017 11:27 pm 
Offline
User avatar

Joined: Mon Sep 07, 2015 1:02 am
Posts: 251
Location: Brisbane
Thanks
I think I'm missing the entire bag of frame parts -
Missing:
-cable guide
-Rubber grommets for the electronic holes included? and that hole you can see forward of the BB in your picture?
-Is there a grommet that goes into the end of the chainstay where the RD exits?
-does it include a steerer expander?

_________________
Chapter 2 Tere


Top
   
PostPosted: Wed May 10, 2017 2:08 am 
Offline

Joined: Mon Jun 13, 2011 12:54 am
Posts: 68
That made in Taiwan sticker is a good thing, not a bad thing!


Top
   
PostPosted: Wed May 10, 2017 4:10 am 
Offline
User avatar

Joined: Mon Sep 07, 2015 1:02 am
Posts: 251
Location: Brisbane
Nah.
It's a constant reminder that you can't afford a C60 ;)



frf (aus distro) is sending me a cable guide so all good.

_________________
Chapter 2 Tere


Top
   
PostPosted: Wed May 10, 2017 5:34 am 
Offline
User avatar

Joined: Sat Apr 23, 2016 4:10 pm
Posts: 109
Location: Ottawa, ON
silvalis wrote:
Nah. It's a constant reminder that you can't afford a C60 ;)


LOL, exactly!!! Prosecco taste, birra budget, amirite?

As best I can remember, you should have received the following:
- headset (bearings, compression ring, cover, top cap + bolt)
- fork expander
- seatpost clamp + bolt
- inline cable barrel adjusters (2)
- rubber blanking grommet (1)
- plastic chainstay grommet
- bottle cage bolts (4)
- recessed brake nut (front fork)
- derailleur hanger
- packet of carbon assembly paste
- two weird tubular rubber grommets (?) whose purpose I still haven't figured out

That's what I got anyway.


Sent from my iPad using Tapatalk

_________________
Mom: He was very sickly until he started riding around on that bicycle.
Dad: Yeah... well... now his body’s fine, but his mind is gone.


Top
   
PostPosted: Wed May 10, 2017 6:05 am 
Offline
User avatar

Joined: Mon Sep 07, 2015 1:02 am
Posts: 251
Location: Brisbane
Thanks for the list. I think the frame must be an ex display - the tubing had been pulled. Looks like I'm missing more than I expected

- recessed brake nut - missing this. Will a standard nut work or is this specific for the fork?
- blanking grommet - is this for the electronic FD hole or the charge port underneath?
- chainstay grommet - frf sending me this as well.

- and more stuff missing...

_________________
Chapter 2 Tere


Top
   
PostPosted: Wed May 10, 2017 5:19 pm 
Offline
User avatar

Joined: Sat Apr 23, 2016 4:10 pm
Posts: 109
Location: Ottawa, ON
Any recessed brake nut should do the trick. The original was 28 mm long end-to-end (25 mm end-to-flange). I replaced mine with a titanium nut from Toronto Cycles.

Electronic FD hole or charge port? Pick one. Maybe I was supposed to get two grommets? In any case I ended up using generic rubber grommets from an auto parts store to seal both holes. Found a size I was juuuust able to squeeze in.

Good thing the distributor is sending you the cable stop for the chain stay. That one’s kinda critical…

Good luck with your build. Let me know how it turns out. Mine is currently just a hair over 7 kg (size 50S) with room for improvement.


Top
   
PostPosted: Wed May 10, 2017 5:22 pm 
Offline
User avatar

Joined: Sun Nov 07, 2010 9:14 pm
Posts: 4770
Often the fork brake nuts are specific to the fork. Just make sure you can get at least 6 threads engaged without the brakenut bottoming out (too long). Less than 6 threads engaged (Campy's recommendation) and then you start to compromise holding strength etc.

_________________
Colnago C60 - PR99
C59 Five Years Later
My Special Colnago EPQ
Trek Emonda SL Campagnolo SR


Top
   
PostPosted: Tue May 16, 2017 7:14 am 
Offline
User avatar

Joined: Mon Sep 07, 2015 1:02 am
Posts: 251
Location: Brisbane
Distributor fail. Sent me a generic cable guide that doesn't come close to fitting. Can't really cut it up to suit either.
And the rd cable grommet sent is the wrong size as well
Back to sq one. Might try to get a shop to source it this time.

_________________
Chapter 2 Tere


Top
   
PostPosted: Wed Nov 01, 2017 5:51 am 
Offline

Joined: Wed Nov 01, 2017 5:00 am
Posts: 1
Building up a cx zero at the moment. Has anyone done this with Di2? I am pondering the best way to route the di2 cable into the frame. Any recommendations/photos much appreciated!


Top
   
Posted: Wed Nov 01, 2017 5:51 am 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 11 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. BB cable guide bolt problem

in Road

wilwil

3

404

Sat May 06, 2017 9:39 am

jekyll man View the latest post

There are no new unread posts for this topic. Tarmac SL bottom bracket cable guide mechanical setup

in Road

ak47

4

568

Mon Mar 27, 2017 12:11 pm

cyclespeed View the latest post

There are no new unread posts for this topic. Colnago C60 Sizing Guide for short leg

[ Go to page: 1 2 3 ]

in Road

bryrene

33

3155

Sat Aug 19, 2017 9:06 pm

cdkoo View the latest post

There are no new unread posts for this topic. Caad12 rear brake guide missing?

in Road

Nejmann

8

486

Sun Sep 10, 2017 2:08 am

TarugoKing View the latest post

There are no new unread posts for this topic. Colnago Super vs Colnago Master X-light

in Road

Kupepe

5

2322

Tue Jan 10, 2017 8:19 am

Zakalwe View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Baidu [Spider], Catagory6, coachboyd, Google Adsense [Bot], jlok, spdntrxi, toronto-rider, wheelbuilder and 22 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited