Alligator Ilink / Mini Ilink

Discuss light weight issues concerning road bikes & parts.
Post Reply
Luca79
Posts: 33
Joined: Thu Aug 04, 2011 8:18 pm

by Luca79

I'm in the process of re-cabling my Supersix EVO and I was wondering what's the best lightweight option.

I was suggested to go with Ilinks for brakes and Mini Ilink for gears, is this a good system in your opinion?

I'm also a bit concerned about how easy it is to install this cables, is this something that any decent bike mechanic can easily do?

Thanks!

1415chris
Posts: 1014
Joined: Sat Apr 18, 2009 8:59 am
Location: Surrey UK

by 1415chris

Both quite easy to install. Mini version takes a time to settle in. The segments compress into each other, which requires constant cable adjustment.

by Weenie


Luca79
Posts: 33
Joined: Thu Aug 04, 2011 8:18 pm

by Luca79

Thanks!

Any idea on how much weight can be saved switching from standard Sram Red / Gore on cables to the Alligators?

Johnny Rad
Posts: 1802
Joined: Fri Feb 17, 2006 6:22 am
Location: Zion

by Johnny Rad

Many years ago, I used Alligator Mini I-Link shift and I-Link braking cables. I constantly battled poor shifting and returned to the heavier Yokozuna shift cables with my tail between my legs. The I-Links were just fine for braking.

I later went with Aican Bungarus for braking because they were reportedly lighter than I-Links. After maybe 3 seasons, I replaced them with another set. I'm on a new bike and I chose Aican for brakes again. They just work great, but many of the little barrels (ferrules?) corroded and some chipped / cracked over time.

http://fairwheelbikes.com/aican-bungaru ... cable-set/

http://blog.fairwheelbikes.com/2012/08/ ... uperlight/

thedonnydino
Posts: 84
Joined: Tue Jun 07, 2016 11:10 pm

by thedonnydino

Luca79 wrote:I'm in the process of re-cabling my Supersix EVO and I was wondering what's the best lightweight option.

I was suggested to go with Ilinks for brakes and Mini Ilink for gears, is this a good system in your opinion?

I'm also a bit concerned about how easy it is to install this cables, is this something that any decent bike mechanic can easily do?

Thanks!


Hi Luca, don't bother. If you ride your bike often, you will find that the links compress and as previously pointed out cables need to be constantly adjusted. In addition, they are not durable, with the out coating chipping quite easily.

Jagwire Elite Links are a superior product. Light shifting, and still look like new with at least 8 months on them.

superdx
Posts: 507
Joined: Sun Jun 29, 2014 1:27 pm

by superdx

+1 for the Jagware Elite Links, I have them for braking. Very responsive braking, good power, no complaints. Best part is no more outer cable fraying on my Evo where the cable goes into the frame.

Can't say anything for shifting peformance as I'm on Di2.

Mep
Posts: 269
Joined: Fri May 28, 2004 4:11 pm

by Mep

superdx wrote:+1 for the Jagware Elite Links, I have them for braking. Very responsive braking, good power, no complaints. Best part is no more outer cable fraying on my Evo where the cable goes into the frame.

Can't say anything for shifting peformance as I'm on Di2.

Were there any weight savings going to the Elite Links?

by Weenie


Post Reply
  • Similar Topics
    Replies
    Views
    Last post