Help me slam my stem
Moderator: robbosmans
I was going to post that slamming the stem to make a fashion statement is just dumb especially if it makes your neck hurt.
If you only have a 1/2" drop though from saddle to bars and only 2.5cm of spacers then it sounds like your frame is too big. You should probably be looking for some professional help with fitting. When pros slam their stem it's usually on a frame that is a size or two too small.
If you only have a 1/2" drop though from saddle to bars and only 2.5cm of spacers then it sounds like your frame is too big. You should probably be looking for some professional help with fitting. When pros slam their stem it's usually on a frame that is a size or two too small.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
AJS914 wrote:When pros slam their stem it's usually on a frame that is a size or two too small.
That makes sense to me. I see a lot of people on here with frames smaller than mine. Either every cyclist on here is 5'8" or shorter, or a lot of people are riding smaller frames. I have a 56 with 50mm of spacers. I recently went from a 100mm to 110mm and put one of my 5mm spacers above going from a stack of 55mm spacers. I am more comfortable riding in the drops for long periods of time. I feel ok with that, but I'm not willing to sacrifice the enjoyability of my rides just to please some internet trolls. Slammed stems do look cool, but that's not why I bought or ride my bike.
AJS914 wrote:I was going to post that slamming the stem to make a fashion statement is just dumb especially if it makes your neck hurt.
If you only have a 1/2" drop though from saddle to bars and only 2.5cm of spacers then it sounds like your frame is too big. You should probably be looking for some professional help with fitting. When pros slam their stem it's usually on a frame that is a size or two too small.
A lot of great feedback in this thread. What's your thinking on the frame being too big?
I'm trying to envision a smaller frame - my saddle would be same height, reach would be shorter, but presumably I'd still have to get the handlebar up to the same height.
Last edited by Mep on Thu Mar 23, 2017 12:45 am, edited 1 time in total.
The frame sounds too small because you said you only have 1/2 inch drop from saddle to bars and you are trying to remove 25mm of spacers to slam your stem. That means your max drop would be only 40mm on this bike. On most road bikes you should be able to achieve a much larger max drop than that. I'm guessing that you have a short stem on the bike?
Now, maybe you didn't fully describe it or I misinterpreted what you wrote. If you posted your height and the size of your bike and maybe pictures people here could really help you.
Now, maybe you didn't fully describe it or I misinterpreted what you wrote. If you posted your height and the size of your bike and maybe pictures people here could really help you.
-
- Posts: 1162
- Joined: Fri Feb 18, 2005 6:50 pm
- Location: Wilmington, DE
- Contact:
Mep wrote:I'm trying to envision a smaller frame - my saddle would be same height, reach would be shorter, but presumably I'd still have to get the handlebar up to the same height.
Or, your saddle would be the same height, your reach would be the same courtesy of a longer stem, and your handlebars would be much lower than your saddle, the latter point taking advantage of the #1 reason to ride a smaller frame.
If you don't want low handlebars, ride a bigger frame. Simple as that. Sounds like that is where you are already so carrying on. Perhaps over time you can work on increasing your flexibility and strengthening your core to allow for gradually lower handlebars. Once you have your stem slammed then consider a smaller frame (and/or more race-oriented frame if you ride an 'endurance' frame now) to go even lower. You can also use a more negatively angled stem to lower your bars.
-
- Posts: 829
- Joined: Tue Jan 13, 2009 2:35 am
I still don't understand why the OP wants to slam his stem.
He says that lowering his bars any more is uncomfortable and makes his neck hurt. What's the point in intentionally putting yourself into a position that makes you hurt?
This is like when my wife used to buy ridiculous shoes because they looked good but never actually wore them because they hurt her feet.
He says that lowering his bars any more is uncomfortable and makes his neck hurt. What's the point in intentionally putting yourself into a position that makes you hurt?
This is like when my wife used to buy ridiculous shoes because they looked good but never actually wore them because they hurt her feet.
- bikerjulio
- Posts: 1900
- Joined: Fri Dec 11, 2009 10:38 pm
- Location: Welland, Ontario
I've read the OP's various statements about his fit and like most here I'm confused. With an almost slammed saddle and complaints about feeling stretched, I can only picture someone who was sold a bike way too big originally.
We still have absolutely no information about OP's own or the bike's dimensions.
Surely OP could at least post up a picture of his bike.
We still have absolutely no information about OP's own or the bike's dimensions.
Surely OP could at least post up a picture of his bike.
There's sometimes a buggy.
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM
-
- in the industry
- Posts: 429
- Joined: Fri Dec 07, 2012 8:34 pm
- Location: CO
Even easier than posting a picture of OP's bike would be posting OP's height and frame size.
- bikerjulio
- Posts: 1900
- Joined: Fri Dec 11, 2009 10:38 pm
- Location: Welland, Ontario
Or we start a book.
My bet is 5' 4" on a 58 cm frame.
My bet is 5' 4" on a 58 cm frame.
There's sometimes a buggy.
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
- bikerjulio
- Posts: 1900
- Joined: Fri Dec 11, 2009 10:38 pm
- Location: Welland, Ontario
Well, I thought that might coax some information out of you.
Without knowing anything else I'm left thinking "why is the saddle so low?"
If you are 5' 7" on a 52 cm which normally one would think is approximately right.
Perhaps you are unusually proportioned?
Short legs and long torso is not unusual. But then why would you feel "stretched?"
So many questions........
Calling for a qualified professional fit, rather than the internet version.
Without knowing anything else I'm left thinking "why is the saddle so low?"
If you are 5' 7" on a 52 cm which normally one would think is approximately right.
Perhaps you are unusually proportioned?
Short legs and long torso is not unusual. But then why would you feel "stretched?"
So many questions........
Calling for a qualified professional fit, rather than the internet version.
There's sometimes a buggy.
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM