New Stages Pwoermeter for Campagnolo Super Record...crank arm question.

Discuss light weight issues concerning road bikes & parts.
Post Reply
kode54
Posts: 1102
Joined: Tue May 23, 2006 9:39 pm

by kode54

i have an older 5-arm Campy Super Record Ti mid-compact crank. I see that Stages came out with the Campy crank PM.

question is...will that ND crank arm match or work with the older 11SR?
- AX Lightness Vial EVO D + DA9150 + Enve SES 3.4 carbon hubs
- Parlee Altum + DA9150 + Enve SES 4.5 carbon hubs
- Parlee ESX + DA9150 + THM SRM PM + Enve SES 6.7 CK hubs
- Independent Fabrication Ti FLW + DA9100 + Enve 3.4 CK hubs

duvivr6
Posts: 220
Joined: Mon Apr 21, 2014 2:28 pm
Location: PR

by duvivr6

In for an answer because I also want one but have older 5 arm campy cranksets =)

by Weenie


claus
Posts: 244
Joined: Fri Oct 31, 2008 10:04 pm

by claus

It's still an "Ultra Torque(TM)" axle (see the Campagnolo docs), so it should work (i.e., fit together).
However, you have a Ti axle: is the Stages using Ti too? I cannot find that info on their webpage.

BTW: have you contacted Stages?

kode54
Posts: 1102
Joined: Tue May 23, 2006 9:39 pm

by kode54

claus wrote:It's still an "Ultra Torque(TM)" axle (see the Campagnolo docs), so it should work (i.e., fit together).
However, you have a Ti axle: is the Stages using Ti too? I cannot find that info on their webpage.

BTW: have you contacted Stages?


i contacted by email. they just responded after you posted. they didn't do any testing on previous versions...only the new 4-arm one.

i think there's no Ti version...yet. arm shape is slightly different.
- AX Lightness Vial EVO D + DA9150 + Enve SES 3.4 carbon hubs
- Parlee Altum + DA9150 + Enve SES 4.5 carbon hubs
- Parlee ESX + DA9150 + THM SRM PM + Enve SES 6.7 CK hubs
- Independent Fabrication Ti FLW + DA9100 + Enve 3.4 CK hubs

fogman
Posts: 759
Joined: Fri Oct 30, 2009 10:36 pm

by fogman

The left crank arm is going to fit fine. The graphics and shape of the 2014 Super Record left crank arm is slightly different than the 2015 crank arm. The internal splines on the axle are the same, though. I believe they are both Ti axles.


Sent from my iPhone using Tapatalk
It's all downhill from here, except for the uphills.

AZK
Posts: 130
Joined: Thu Jun 23, 2016 10:11 am

by AZK

kode54 wrote:i have an older 5-arm Campy Super Record Ti mid-compact crank. I see that Stages came out with the Campy crank PM.

question is...will that ND crank arm match or work with the older 11SR?



Make sure the stages is a Ti Crank as the thread is also reverse threaded on SR.

'The bolt is reverse threaded so that it can't be used with the standard steel axles, because a chemical reaction between the Ti and steel could cause it to seize '

Please keep us posted, considering the same option if its a proper SR half shaft left arm crank.

by Weenie


Post Reply
  • Similar Topics
    Replies
    Views
    Last post