Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Sat Oct 21, 2017 1:04 am

All times are UTC+01:00





Post new topic  Reply to topic  [ 14 posts ] 
Author Message
PostPosted: Sat Mar 04, 2017 4:36 pm 
Offline

Joined: Fri Jun 03, 2016 5:08 pm
Posts: 907
Tired trying to get hold of a Quarq SRAM power meter (165mm) for the missus' bike, and she likes Q rings so thinking to stick a 3D+ MAS Inpower on her bike. Should be okay? Just get a BB30 press fit and use different bearings?

https://www.mantel.com/uk/rotor-pf4630& ... oCHJDw_wcB

And use these?

http://www.sigmasport.co.uk/item/Rotor/ ... tAodEkEAQQ

Or would you say hold out for the Quarq SRAM and stick Q rings on it? Might look offkey, Q Rings on a SRAM Red arm. Not many pics going around.

Anyone have a decent pic of an Aeroad with Rotor/Q Rings on? Only saw a few poor shots so far on INS and Google.


Top
   
Posted: Sat Mar 04, 2017 4:36 pm 


Top
   
 
PostPosted: Sat Mar 04, 2017 8:23 pm 
Offline
User avatar

Joined: Wed Apr 25, 2007 10:23 am
Posts: 1262
Location: Pack filler
Do a search.
There's quite a big thread on here and elsewhere about doing this.
If you want to be changing bearings every 5 minutes then go ahead.
BB86 is a PF hollowtech 2, so to get 30mm bearings in, somethings got to give (in this case bearing size).

Buy either a shimano chainset and use Pioneer, or rotor 3d24 and a P2Max.

_________________
Official cafe stop tester


Top
   
PostPosted: Sat Mar 04, 2017 10:22 pm 
Offline

Joined: Sun Jan 05, 2014 11:04 pm
Posts: 170
Location: Denmark
I have run a praxis chainset on my winter/rain bike, it too has a 30 mm axle, it has run for 2 years and seen some foul weather, lots of rain and salt, no problem with the bearings at all, still runs very smooth


Top
   
PostPosted: Sun Mar 05, 2017 2:29 am 
Offline
User avatar

Joined: Mon Mar 18, 2013 3:45 am
Posts: 344
The Rotor BB from mantel.com is the wrong type its a 4630 for ID 46mm BB shells. BB86 is a ID 41mm shell, the Sigma Sport linked BB is correct being a 4130.

I would recommend a BB from either Hope - excellent quality 4130 pressfit with good seals or something from HSC, Kogel, CBear, Aita, Enduro ect.

Get the best quality you can afford, the tighter the tolerances the better the BB will perform and last longer. Get the BB faced so you know everything will align properly as with the smaller bearing size they won't deal with being out of alignment as well.

If you install correctly there will be no issues, same as any other BB standard.

Oh and stay away from RaceFace stuff.


Top
   
PostPosted: Sun Mar 05, 2017 4:13 pm 
Offline

Joined: Fri Jun 03, 2016 5:08 pm
Posts: 907
Thanks Fixie, I actually took those links from advice given on another forum when I was researching this. Glad I asked here or could have made a mistake! Actually feel a bit put off the idea though now, and maybe will hold out for Quarq. But if I go for it I'll heed your advice on the bearings.


Top
   
PostPosted: Sun Mar 12, 2017 11:28 am 
Offline

Joined: Fri Jun 03, 2016 5:08 pm
Posts: 907
Back on this again, about to order this bottom bracket:

http://www.velotechservices.co.uk/shop/ ... 01938&fo=1

Any objections to it fitting the Aeroad's BB86 shell with the BB30 Rotor Inpower meter? :P


Top
   
PostPosted: Sun Mar 12, 2017 12:24 pm 
Offline

Joined: Mon Jul 13, 2009 9:19 pm
Posts: 346
Location: Denmark
I also have a bb86 and also thought about buying a bb30 crank but decided not to. If I was to do it I would stay away from rotor bottom brackets, I had a rotor BB but a bsa and wasn't impressed. I have read numerous durability issues with rotor BB and also Fixie doesn't have rotor on his list :)


Top
   
PostPosted: Mon Mar 13, 2017 3:21 am 
Offline
in the industry
User avatar

Joined: Fri Jan 23, 2004 6:31 pm
Posts: 392
I have the 4130 on my Aeroad with Ceramicspeed BB. Works perfectly.

Image

_________________
carbonLORD.com


Top
   
PostPosted: Mon Mar 13, 2017 4:45 am 
Offline

Joined: Sun Jun 29, 2014 1:27 pm
Posts: 499
Was looking for confirmation as well, I also have a BB30 Quarq Elsa and maybe installing into a PF86 frame in the near future.

Searching in the forums didn't find anything. First thread to actually confirm everything!


Top
   
PostPosted: Mon Mar 13, 2017 9:16 am 
Offline

Joined: Tue Nov 03, 2015 3:02 pm
Posts: 112
Location: Europe
No problem also here. I am using 3D+ crank on my Aeroad with Tripeak BB


Top
   
PostPosted: Mon Mar 13, 2017 10:06 am 
Offline

Joined: Fri Jun 03, 2016 5:08 pm
Posts: 907
Any pics calvin?

Rare to see Rotors on Aeroads..

Thanks carbonlord, that looks beast :P


Top
   
PostPosted: Mon Mar 13, 2017 10:59 am 
Offline

Joined: Tue Jun 07, 2005 7:39 am
Posts: 52
Location: austria
one thing you have to consider is internal cable routing...
most or even all PF86 BBs for 30mm don't have a sleeve inside.
so you should check (or hack) clearance and non-rubbing of cables inside the frame-BB area.


Top
   
PostPosted: Mon Mar 13, 2017 11:48 am 
Offline

Joined: Fri Jun 03, 2016 5:08 pm
Posts: 907
Good thinking, her bike has eTap though so no worries with the cables thankfully.


Top
   
PostPosted: Mon Mar 13, 2017 12:02 pm 
Offline
User avatar

Joined: Mon Mar 18, 2013 3:45 am
Posts: 344
That velotech link is the correct BB. As fitty4 said, I didn't have Rotor on my list. They are ok but seem like a mixed bag durability wise even with tight seals.

A little bit of hot glue will keep cables out of the way or you can fashion your own sleeve.


Top
   
Posted: Mon Mar 13, 2017 12:02 pm 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 14 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. New frame help - Canyon Aeroad BB?

in Road

joelpace

4

1154

Tue Apr 11, 2017 6:46 pm

milesthedog View the latest post

There are no new unread posts for this topic. Attachment(s) New Canyon Aeroad for 2018?

[ Go to page: 1 2 3 ]

in Road

Noctiluxx

31

12851

Wed Oct 18, 2017 4:53 pm

SteveCPH View the latest post

There are no new unread posts for this topic. Attachment(s) How to install the Canyon Aeroad cf slx 8.00 seatpost

in Road

edenn

3

869

Mon May 15, 2017 4:40 pm

Shrike View the latest post

There are no new unread posts for this topic. Attachment(s) Canyon Aeroad - what electronic groupset?

in Road

gerryc89

3

1226

Tue Nov 29, 2016 1:57 pm

Multebear View the latest post

There are no new unread posts for this topic. Attachment(s) Canyon aeroad steerer plug adjustment

in Road

dannyBBo

1

348

Mon Aug 07, 2017 2:21 pm

alcatraz View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Bing [Bot], Google [Bot], Google Adsense [Bot], huddini, jch3n, jwfinesse, PSJoyce and 27 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited