Crank ideas for 2017 Scott Addict with BB92 PF
Moderator: robbosmans
-
- Posts: 2026
- Joined: Fri Feb 17, 2006 6:22 am
- Location: Zion
I'm looking for crank ideas to fit a 2017 Scott Addict with BB92 PF.
I've seen the obvious SRAM Red22 heavyweight option, but not much else... what am I missing?
By the way, should I also search for BB86 and BB386 EVO cranks? Are they much the same?
Thanks for the info and hopefully a little education.
Ride strong, Weenies.
I've seen the obvious SRAM Red22 heavyweight option, but not much else... what am I missing?
By the way, should I also search for BB86 and BB386 EVO cranks? Are they much the same?
Thanks for the info and hopefully a little education.
Ride strong, Weenies.
Pretty certain it's BB86. BB386 isn't the same, identical width shell but different diameter shell.
Campag, Shimano & Sram have cranks to fit using specific adapters and bottom brackets. Campag SR Ti and Sram Red are pretty light but there are other lighter boutique options.
Campag, Shimano & Sram have cranks to fit using specific adapters and bottom brackets. Campag SR Ti and Sram Red are pretty light but there are other lighter boutique options.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
I work at a Scott Dealer. I can confirm that it's BB86. Sorted
Second, you have a few options.
You can put on a BB86 to 30mm BB on, like this kogel unit here. A friend has one and he loves it.
Then you can put any 30mm spindle crank that isn't a straight BB30 spindle width crank. This includes Campagnolo Over Torque cranks(what my friend runs), 30mm Easton/raceface cranks, etc. etc. That would be your best option for weight saving.
Hope this helps
Second, you have a few options.
You can put on a BB86 to 30mm BB on, like this kogel unit here. A friend has one and he loves it.
Then you can put any 30mm spindle crank that isn't a straight BB30 spindle width crank. This includes Campagnolo Over Torque cranks(what my friend runs), 30mm Easton/raceface cranks, etc. etc. That would be your best option for weight saving.
Hope this helps
20% cyclist/80% J.I.T
-
- Posts: 2026
- Joined: Fri Feb 17, 2006 6:22 am
- Location: Zion
ab01ns wrote:I work at a Scott Dealer. I can confirm that it's BB86. Sorted
Second, you have a few options.
You can put on a BB86 to 30mm BB on, like this kogel unit here. A friend has one and he loves it.
Then you can put any 30mm spindle crank that isn't a straight BB30 spindle width crank. This includes Campagnolo Over Torque cranks(what my friend runs), 30mm Easton/raceface cranks, etc. etc. That would be your best option for weight saving.
Hope this helps
Yes, helps immensely. Will send an IM / DM with a couple follow-up questions.
You're a mind reader on the Kogel BB ... just what I was thinking. Seems to have rec'd very good reviews.
-
- Posts: 2026
- Joined: Fri Feb 17, 2006 6:22 am
- Location: Zion
Sadly, looks like SRAM Red22 GXP for me.
The THM Clavicula with PF86 is big $$$ and I've blown my wad on loads of different bits for a new build already.
The Kogel ceramic is in ... BB86-24 GXP / BB92-24 GXP
The THM Clavicula with PF86 is big $$$ and I've blown my wad on loads of different bits for a new build already.
The Kogel ceramic is in ... BB86-24 GXP / BB92-24 GXP
-
- Posts: 938
- Joined: Mon Jan 24, 2011 8:09 pm
Yeah, about to say, Scott uses the PF86. Some type of GXP. I use a SRAM Quarq PM and this BB KC86GXPCH 1 KCNC BB86 w/ ANGULAR CONTACT Ceramic $120.00
Hybird Bearings, GXP.
Hybird Bearings, GXP.
-
- Posts: 2026
- Joined: Fri Feb 17, 2006 6:22 am
- Location: Zion
This is an informative link on BB compatibility with various cranks. Though it's manufacturer / product specific (C-bear), the info matches what I've learned from a dozen online sources. In short, there's not a lot of choices with BB86 PF right now though THM Clavicula ($) will work even though it's not noted. Just wanted to share.
https://www.c-bear.com/bbchart.pdf
...and here's a similar infographic from Kogel compliments of bikerumor.
https://www.bikerumor.com/2014/08/03/ko ... -adapters/
https://www.c-bear.com/bbchart.pdf
...and here's a similar infographic from Kogel compliments of bikerumor.
https://www.bikerumor.com/2014/08/03/ko ... -adapters/
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com