Hollowgram SL Spacer order.

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

Post Reply
nvroadie
Posts: 190
Joined: Tue Mar 31, 2015 11:11 pm

by nvroadie

I have a Cannondale Hollowgram SL crankset and have the 104mm spindle. Does anyone know the spacer order for this spindle in a SuperSix Evo?

nvroadie

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



topflightpro
Posts: 829
Joined: Tue Jan 13, 2009 2:35 am

by topflightpro

One of the manuals listed here should tell you: http://www.cannondale.com/en/USA/Suppor ... ccessories

grover
Posts: 1302
Joined: Mon Jul 26, 2004 1:06 pm

by grover

The 104mm spindle should have a lip on the non-drive side.

Therefore no spacers on the non-drive side.

On the drive side you'll need a wavy washer and up to 5 (start with 3) of the 0.5mm shims to get correct compression of the wavy washer.

http://cf-prd.cannondale.com/~/media/Fi ... 03T175618Z

NOTE: The 104mm spindle will only work if your bottom bracket shell width is 68mm. You didn't specify which year SuperSix EVO you had. Some of them aren't compatible with the 104mm spindle. You may need to buy the 109mm spindle which doesn't have a lip and uses spacers. The user manual for setup with that spindle is the following one.

http://cf-prd.cannondale.com/~/media/Fi ... 03T181633Z

nvroadie
Posts: 190
Joined: Tue Mar 31, 2015 11:11 pm

by nvroadie

I have a 2015 Evo, will the 104mm spindle work with that?.


Sent from my iPhone using Tapatalk

dudemanppl
Posts: 1262
Joined: Fri Feb 22, 2013 5:09 am

by dudemanppl

Yes. ;) On that note, I'll probably ship it out tomorrow.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



nvroadie
Posts: 190
Joined: Tue Mar 31, 2015 11:11 pm

by nvroadie

dudemanppl wrote:Yes. ;) On that note, I'll probably ship it out tomorrow.

Haha thanks


Sent from my iPhone using Tapatalk

Post Reply