Hi, I currently have a Wilier Cento Uno SR which runs a BB386 Evo frame. I tried putting in a BBright rotor crank that came from a Cervelo and the crank spindle is not able to entirely reach the other side of the frame. Due to this I am not able to lock the drive side properly.
Would you have any tips on how to resolve this? Would using a BB30 crank be better?
Rotor Crank Compatability to Wilier Cento 1SR BB386 Evo Frame
Moderator: robbosmans
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Bb30 shell width : 68mm
BB386 shell width : 86mm
answer yourself would it fit
Now , what fits :
- any Shimano
- Sram GXP
- Rotor UBB30
- any Campagnolo
what won't fit :
-any Bb30 crank
BB386 shell width : 86mm
answer yourself would it fit
Now , what fits :
- any Shimano
- Sram GXP
- Rotor UBB30
- any Campagnolo
what won't fit :
-any Bb30 crank
Go to Heaven for the climate, Hell for the company.
Mark Twain
I can be wrong, and have plenty of examples for that
Mark Twain
I can be wrong, and have plenty of examples for that
You will need to change out the spider on the cranks. If my memory serves me right, the BBright Rotor have a wider spider, essentially an inbuilt spacer. It will probably be easier to flip the crank for a non BBright version that it would be finding a spare spider.
What crank do you exactly have?
For bb386evo you need 3D+, 3Df, Flow, Power and 3D30, so quite a choice from Rotor.
Sorry for correction of my post as I was referring to the old Rotor's pdf compatibility flie, which didn't include 3D30 as compatible with bb386evo.
All these cranks to be run on bb-right 79mm shell they need 11.5mm spacer on DS. If you take it off they become 386evo compatible.
For bb386evo you need 3D+, 3Df, Flow, Power and 3D30, so quite a choice from Rotor.
Sorry for correction of my post as I was referring to the old Rotor's pdf compatibility flie, which didn't include 3D30 as compatible with bb386evo.
All these cranks to be run on bb-right 79mm shell they need 11.5mm spacer on DS. If you take it off they become 386evo compatible.