Record 11 Speed Rear Der - Cable Angle Question

Discuss light weight issues concerning road bikes & parts.
Post Reply
alistaird
Posts: 120
Joined: Thu Jul 21, 2016 8:21 pm

by alistaird

All,

My first Record 11 Speed build (and first proper Campag build as well.)

On the RD, the angle in the smallest sprocket between the cable housing and the cable looks quite large? The RD changes nicely through all 11 gears but wondered if this was normal?

ImageDSC_0026 by A&D D, on Flickr

Thanks

A

by Weenie


User avatar
bikerjulio
Posts: 1901
Joined: Fri Dec 11, 2009 10:38 pm
Location: Welland, Ontario

by bikerjulio

The angle looks normal to me but you have the cable incorrectly routed. It goes under the clamp plate, not over it.

Here are the instructions http://www.campagnolo.com/media/files/035_260_Technical%20manual%20-%20Mechanical%20units%20rear%20derailleur%20-%20Campagnolo_Rev02_04_16.pdf
There's sometimes a buggy.
How many drivers does a buggy have?

One.

So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.

http://www.youtube.com/watch?v=GekiIMh4ZkM

alistaird
Posts: 120
Joined: Thu Jul 21, 2016 8:21 pm

by alistaird

Thanks. I've fixed that. :-)
A

Sent from my E6853 using Tapatalk

5 8 5
Posts: 1353
Joined: Sat Jul 29, 2006 2:36 am
Location: UK

by 5 8 5

It looks like you have quite a bit of wear on the inside of the pulley plate? Is the jockey wheel okay?

alistaird
Posts: 120
Joined: Thu Jul 21, 2016 8:21 pm

by alistaird

5 8 5 wrote:It looks like you have quite a bit of wear on the inside of the pulley plate? Is the jockey wheel okay?


It was a 2nd hand RD and I've replaced both pulleys and bearings.

Thanks for the advice.

A

5 8 5
Posts: 1353
Joined: Sat Jul 29, 2006 2:36 am
Location: UK

by 5 8 5

Wasn't sure if it was just the pic. Permanent marker will sort it out.

by Weenie


Post Reply
  • Similar Topics
    Replies
    Views
    Last post