Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Tue Oct 17, 2017 6:36 pm

All times are UTC+01:00





Post new topic  Reply to topic  [ 134 posts ]  Go to page Previous 15 6 7 8 9
Author Message
PostPosted: Fri Apr 21, 2017 12:46 pm 
Offline
User avatar

Joined: Mon Jun 06, 2016 8:45 am
Posts: 579
Double click your control box. Twice.

_________________
5 star and bespoke cycle tours in Majorca

Cycling related videos and reviews


Top
   
Posted: Fri Apr 21, 2017 12:46 pm 


Top
   
 
PostPosted: Fri Apr 21, 2017 4:34 pm 
Offline

Joined: Sun Nov 29, 2015 5:47 pm
Posts: 18
Timujin wrote:
for some reason after the updates, its decided to semi sync shift, i.e. when front mech moves down, rear moves up 2 and vice versa

can i get rid of this.. in the ETube software i cannot seem to find the disable these types of shifting..


Double-tap the button on your A junction box. The LEDs should flash. 1 flash is manual, 2 is shift mode 1, 3 is shift mode 2. Modes 1 and 2 are your synchro/semi-synchro modes that can be set via the app if you have wireless, or via PC through the wired interface.

Just double-tap it until you get back to 1 flash and you should be good. You may also be able to do this via your GPS head unit assuming it supports it. I think Garmin 520/820/1000 are the only ones that currently do though.


Top
   
PostPosted: Fri Apr 21, 2017 4:36 pm 
Offline

Joined: Sun Sep 15, 2013 5:43 pm
Posts: 350
IrrelevantD wrote:
Timujin wrote:
for some reason after the updates, its decided to semi sync shift, i.e. when front mech moves down, rear moves up 2 and vice versa

can i get rid of this.. in the ETube software i cannot seem to find the disable these types of shifting..


Double-tap the button on your A junction box. The LEDs should flash. 1 flash is manual, 2 is shift mode 1, 3 is shift mode 2. Modes 1 and 2 are your synchro/semi-synchro modes that can be set via the app if you have wireless, or via PC through the wired interface.

Just double-tap it until you get back to 1 flash and you should be good. You may also be able to do this via your GPS head unit assuming it supports it. I think Garmin 520/820/1000 are the only ones that currently do though.


gracias amigo... will try it now


Top
   
PostPosted: Fri Apr 21, 2017 8:24 pm 
Offline

Joined: Wed Feb 22, 2006 7:57 am
Posts: 1072
Location: New Zealand
Timujin wrote:
for some reason after the updates, its decided to semi sync shift, i.e. when front mech moves down, rear moves up 2 and vice versa

can i get rid of this.. in the ETube software i cannot seem to find the disable these types of shifting..


Double-pressing the button on your bikes junction box (when the bike is not plugged into etube) will cycle through the 3 shift modes and then flash the current shift mode.

Also press and hold a shift button and the battery light will indicate charge then the lights will flash the current shift mode.

One flash for manual shift, twice for semi-sychro, three times for full synchro.

_________________
Wheelworks.co.nz
New Zealand handbuilt wheels


Top
   
PostPosted: Sat May 13, 2017 2:08 pm 
Offline

Joined: Sat May 13, 2017 2:06 pm
Posts: 2
I've just updated the firmware but software 'hung' and now battery won't recognise system. Any ideas?


Top
   
PostPosted: Sat May 13, 2017 4:11 pm 
Offline
User avatar

Joined: Mon Jun 06, 2016 8:45 am
Posts: 579
altidude wrote:
I've just updated the firmware but software 'hung' and now battery won't recognise system. Any ideas?


Try disconnecting the battery. And reconnect. If no joy, then;

1. Disconnect all components, leaving just the battery and control box.
2. If that's OK, add components back in one at a time.
3. Update them as you go.
4. Cross your fingers and hope.

_________________
5 star and bespoke cycle tours in Majorca

Cycling related videos and reviews


Top
   
PostPosted: Sat May 13, 2017 6:07 pm 
Offline

Joined: Sat May 13, 2017 2:06 pm
Posts: 2
not looking good - is there an easy way to 'reboot' the firmware in the battery?


Top
   
PostPosted: Sat May 13, 2017 6:59 pm 
Offline
User avatar

Joined: Mon Jun 06, 2016 8:45 am
Posts: 579
altidude wrote:
not looking good - is there an easy way to 'reboot' the firmware in the battery?


Not that I know of - maybe someone else will chip in.

Do you have the PCE-1 diagnostic tool?

_________________
5 star and bespoke cycle tours in Majorca

Cycling related videos and reviews


Top
   
PostPosted: Fri Jun 23, 2017 5:50 am 
Offline

Joined: Fri Jun 23, 2017 5:09 am
Posts: 8
HFGent wrote:
...I am annoyed at the fact that synchroshift mode that the downshift from big ring can be programmed only at the 2nd to lowest gear. It's really annoying...


I created an account just to search for and confirm this. My frustration with this knows no ends. I won't even talk about all the things I did to "upgrade" to the configuration I have now from the factory set up on the Cervelo S5 Team LE I just bought. It makes me want to change cassettes...

_________________
lance - no, not that guy, I started racing in 1976.
1980 A-D Ultima
1999 Softride TT
2013 Cervelo S5 Team LE


Top
   
PostPosted: Fri Jun 30, 2017 1:41 pm 
Offline

Joined: Sun Mar 05, 2017 1:18 pm
Posts: 14
Just a note that may help people in the future. I swapped out my non Bluetooth d-fly for the new Bluetooth one, and on the way managed to completely toast my set up. Only the left lever was registering even when I plugged my PC in.
I eventually solved my issues after a great deal of panic by unplugging everything that went into the junction box and connecting the PC, running E-TUBE a few times and then plugging components in one at a time, closing and restarting E-TUBE after each component. Luckily all good now, but there was an hour or two of complete dread!


Sent from my iPhone using Tapatalk


Top
   
PostPosted: Wed Sep 27, 2017 5:42 pm 
Offline

Joined: Sun Dec 16, 2007 2:46 pm
Posts: 15
IrrelevantD wrote:
rcb78 wrote:
The official word from Shimano North America is that the restriction will be lifted for specific chainring combos, i.e. those with a small enough tooth difference so that there is no rubbing in the small/small combo. As of last week, the way to avoid that was to tell the E-Tube software that you are running an 'allowed' combo, but that will throw the numbers in the gear ratio chart, leaving you to do your own math. They did not tell us what the tooth difference limit officially is, but 53/39 is allowed and 50/34 & 52/36 are not.


So, I tried to setup semi-synchro today with the new firmware update and kept getting the following error:

"bike has a gear structure that cannot be configured"

I'm guessing it's due to this, as I have it configured for 52/36 (actually running 50/36 elliptical). Anyone else seeing this error? Shimano is giving absolutely no information in the app as to what "gear structure" it is that cannot be configured.

Did you find a solution to that message?


Top
   
PostPosted: Sat Oct 14, 2017 5:51 pm 
Offline

Joined: Sun Nov 29, 2015 5:47 pm
Posts: 18
Edu24h wrote:
Did you find a solution to that message?


Sorry for the delayed reply, been a while since I logged in. So I got it to work, forget exactly how. I might have just set it to a "supported" configuration. Ended up going back to normal shifting. Didn't really like the synchro or semi-synchro.


Top
   
PostPosted: Sat Oct 14, 2017 6:40 pm 
Offline
User avatar

Joined: Fri Jul 23, 2004 8:24 pm
Posts: 2162
Location: Houston, Texas
I also reverted back to semi-synchro as synchro shift mode would not allow me to use the largest rear cog to top a hill without shiting to the small chainring, which often meant shifting back to the big chainring 10-20 seconds later.

_________________
Michael - The Anaerobic Threshold is neither...


Top
   
PostPosted: Sun Oct 15, 2017 10:42 pm 
Offline

Joined: Sat Jan 26, 2008 10:25 am
Posts: 467
Location: Cantabria
This Synchro Shift feature is a really frustrating thing... First the R 9150 RD doesn't take the slack on all gears even though it looks like you have an anchor fixed to the rear of the bike (not to mention how difficult it is to remove the wheel-wasn't it that the new standard was meant to make it easier?)

Then the function is downright awkward. The shifts to the small ring are slow like b*****s and it will stay on the big ring until the chain is at 90 degrees with the road?

Rubbish


Skickat från min iPhone med Tapatalk


Top
   
Posted: Sun Oct 15, 2017 10:42 pm 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 134 posts ]  Go to page Previous 15 6 7 8 9

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. New Shimano eTube 3.2.1 enables synchro shifting for 9070?

in Road

2old4this

6

821

Thu Mar 30, 2017 8:21 am

TurboKoo View the latest post

There are no new unread posts for this topic. Setting up AX3000s with Tune housing

in Road

4ibanez

6

480

Fri May 12, 2017 5:23 am

shimmeD View the latest post

There are no new unread posts for this topic. Setting up the Shimano Di2 EW-RS910 Bar End Junction A Charging Point 2 Port

in Road

melchionda

13

3513

Sun Apr 02, 2017 2:03 am

sugarkane View the latest post

There are no new unread posts for this topic. SRAM shifting with Di2

in Road

sturvey

3

939

Sat Mar 11, 2017 6:28 am

Racingevo View the latest post

There are no new unread posts for this topic. Sram red 22 shifting issue

in Road

Olivv

10

796

Tue May 16, 2017 5:44 pm

Olivv View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Google [Bot], Google Adsense [Bot], lovemyway, tommasini, Yahoo [Bot] and 32 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited