Shimano Technical Q&A. :)
Moderator: robbosmans
-
- Posts: 725
- Joined: Sun Jan 26, 2014 3:44 am
If you were able to go the Shimano head office in Japan, for a Q&A session with some of the designers / engineers there, what questions would you want to ask them?
I have my own questions ready, but wondered what else other people might want me to ask...
I have my own questions ready, but wondered what else other people might want me to ask...
I would ask why they're specifying (for example) their Dura Ace 9070 RD with a tooth maximum of 28 but it will work fine with 30 & 32...
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
TheDarkInstall wrote:If you were able to go the Shimano head office in Japan, for a Q&A session with some of the designers / engineers there, what questions would you want to ask them?
I have my own questions ready, but wondered what else other people might want me to ask...
Where is synchro shift for Road.
- cassettes that start at 12 or even 13, but keep the 16 cog
- flexible cassettes, eg in 3 blocs (11 thru 15 or 12-16, then 16-17-19 or 17-19-21 or... the the upper cluster)
- super compact road cranksets, 46/30 or 44/28 (basically 1x with a bailout granny)
- flexible cassettes, eg in 3 blocs (11 thru 15 or 12-16, then 16-17-19 or 17-19-21 or... the the upper cluster)
- super compact road cranksets, 46/30 or 44/28 (basically 1x with a bailout granny)
- cyclespeed
- Posts: 1134
- Joined: Mon Jun 06, 2016 8:45 am
Why are we having to wait so long for DA Di2 9150?
-
- Posts: 290
- Joined: Sat Oct 15, 2016 9:08 pm
crux wrote:I would ask why they're specifying (for example) their Dura Ace 9070 RD with a tooth maximum of 28 but it will work fine with 30 & 32...
+1
Also I'd like to know what's the one thing they would like to have but is technically impossible to make today.
trimenc wrote:When will we see wireless Di2? Real WIREless (No wires at all)
I could see wireless as beneficial on a MTB where it's more difficult to have internal wiring. But on a road bike I really don't see a need. Nowadays bike manufacturers are including internal mechanical/electronic wire routing options. Once the wires are installed (easily using the magnet tool) the benefits of a wired system outweighs a wireless system.
- jekyll man
- Posts: 1571
- Joined: Wed Apr 25, 2007 10:23 am
- Location: Pack filler
pdlpsher1 wrote:trimenc wrote:When will we see wireless Di2? Real WIREless (No wires at all)
I could see wireless as beneficial on a MTB where it's more difficult to have internal wiring. But on a road bike I really don't see a need. Nowadays bike manufacturers are including internal mechanical/electronic wire routing options. Once the wires are installed (easily using the magnet tool) the benefits of a wired system outweighs a wireless system.
Assemble many bikes (as in for a living), and you will see what the true benefits of a wireless system are.
Build time drastically reduced.
Performance benefit? Negligible, but then again i dont see the improvement over mechanical anyway.
Official cafe stop tester
icenutter wrote:Why have they brought out powermeters when the market is already saturated?
Do they plan on using more composites? eg cranks, derailleur cages...
There's a really good article in the German Tour magazine on Shimano. The #1 reason why they stuck to aluminum is cost. In aluminum manufacturing there's almost no human touching the part. Everything is automated whereas carbon is labor intensive. Also with aluminum there's no waste in materials. In Shimano's view aluminum parts (i.e. crank) perform just as well as the carbon counterpart, less the bling factor.
jekyll man wrote:pdlpsher1 wrote:trimenc wrote:When will we see wireless Di2? Real WIREless (No wires at all)
I could see wireless as beneficial on a MTB where it's more difficult to have internal wiring. But on a road bike I really don't see a need. Nowadays bike manufacturers are including internal mechanical/electronic wire routing options. Once the wires are installed (easily using the magnet tool) the benefits of a wired system outweighs a wireless system.
Assemble many bikes (as in for a living), and you will see what the true benefits of a wireless system are.
Build time drastically reduced.
Performance benefit? Negligible, but then again i dont see the improvement over mechanical anyway.
It really doesn't take long to route several cables inside a frame. How much time do you save?
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com