Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Mon Nov 20, 2017 6:12 pm

All times are UTC+01:00





Post new topic  Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Mon Nov 14, 2016 4:06 pm 
Offline

Joined: Tue May 23, 2006 9:39 pm
Posts: 1055
i have a 10 speed RZR i want to convert to 11 speed. i found that an Edco cassette will fit with the ten+eleven lock ring.

while servicing the hub, it looks to be a Tune hub. I asked Jason at FWB and he says that i can't use any of the replacement hubs that they sell.
My hub is silver.

are there alternative ways to convert besides the Edco cassette option? Wheels Manufacturing has a Campy cassette with Shimano splines that may work and not cost as much as the Edco.
the Edco combo is difficult to find in the US as well.

i cleaned the hub and repacked the grease. tons of shims on both sides of the end caps as well...so i should be able to move the shims to accommodate the extra width if i used an Edco or WM cassette, yes?

_________________
- AX Lightness Vial EVO D + DA9070 + Enve SES 3.4 carbon hubs
- Parlee Altum + DA9150 + Enve SES 4.5 carbon hubs
- Parlee ESX + DA9070 + THM SRM PM + Enve SES 6.7 CK hubs
- Independent Fabrication Ti FLW + Campy SR11 + Enve 3.4 CK hubs


Top
   
PostPosted: Mon Nov 14, 2016 4:54 pm 
Offline

Joined: Thu Mar 08, 2012 11:43 pm
Posts: 3326
kode54 wrote:
i cleaned the hub and repacked the grease. tons of shims on both sides of the end caps as well...so i should be able to move the shims to accommodate the extra width if i used an Edco or WM cassette, yes?

The Edco cassette fits naturally on the 10sp free hub so there is no extra width to accommodate - that's the point. They gain the space by overhanging the big cog inboard of the free hub.


Top
   
Posted: Mon Nov 14, 2016 4:54 pm 


Top
   
 
PostPosted: Mon Nov 14, 2016 5:05 pm 
Offline

Joined: Tue Sep 25, 2012 7:08 am
Posts: 232
wingguy wrote:
kode54 wrote:
i cleaned the hub and repacked the grease. tons of shims on both sides of the end caps as well...so i should be able to move the shims to accommodate the extra width if i used an Edco or WM cassette, yes?

The Edco cassette fits naturally on the 10sp free hub so there is no extra width to accommodate - that's the point. They gain the space by overhanging the big cog inboard of the free hub.


Plus it's pretty light, which is the reason you got the RZRs in the first place. Almost the same weight as the sram red.


Top
   
PostPosted: Mon Nov 14, 2016 5:25 pm 
Offline

Joined: Tue May 23, 2006 9:39 pm
Posts: 1055
good to know. thx for the answers. now...i have to see if i can get one in the US. will probably have to buy overseas since Reynolds doesn't seem like they stock them anymore.

real reason is to try my hand with tubulars...which these are.

_________________
- AX Lightness Vial EVO D + DA9070 + Enve SES 3.4 carbon hubs
- Parlee Altum + DA9150 + Enve SES 4.5 carbon hubs
- Parlee ESX + DA9070 + THM SRM PM + Enve SES 6.7 CK hubs
- Independent Fabrication Ti FLW + Campy SR11 + Enve 3.4 CK hubs


Top
   
PostPosted: Mon Nov 14, 2016 9:52 pm 
Offline

Joined: Tue Sep 25, 2012 7:08 am
Posts: 232
I got mine from total cycling. With the exchange rate now you would save $40 over what I paid.

http://www.totalcycling.com/Mobile/Mobi ... elID=22156


Top
   
PostPosted: Mon Nov 14, 2016 10:06 pm 
Offline

Joined: Tue May 23, 2006 9:39 pm
Posts: 1055
great tip! thx for the link. going to order that.

_________________
- AX Lightness Vial EVO D + DA9070 + Enve SES 3.4 carbon hubs
- Parlee Altum + DA9150 + Enve SES 4.5 carbon hubs
- Parlee ESX + DA9070 + THM SRM PM + Enve SES 6.7 CK hubs
- Independent Fabrication Ti FLW + Campy SR11 + Enve 3.4 CK hubs


Top
   
PostPosted: Tue Nov 15, 2016 5:17 am 
Offline

Joined: Sun Mar 02, 2014 6:17 pm
Posts: 53
We're talking a Reynolds RZR right? Have you called Reynolds and asked if they have a replacement 11sp FH? Other models of wheels from them were capable of swapping 10 for 11, worth the phone call in my opinion.


Top
   
Posted: Tue Nov 15, 2016 5:17 am 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. converting a ti bike to disc

in Road

markyboy

4

623

Sat Jun 10, 2017 1:05 pm

Tomstr View the latest post

There are no new unread posts for this topic. Converting flat mount to post mount

in Road

Miller

1

442

Wed Mar 01, 2017 11:55 am

Broady View the latest post

There are no new unread posts for this topic. Frame Options Under ~$800

[ Go to page: 1 2 ]

in Road

mrpillow

25

2222

Mon Jul 03, 2017 10:27 am

shinjiwoon View the latest post

There are no new unread posts for this topic. BBright alternative options....

in Road

diegogarcia

5

335

Wed Oct 25, 2017 8:24 pm

1415chris View the latest post

There are no new unread posts for this topic. Decent fork options

in Road

TheDarkInstall

5

709

Tue Mar 28, 2017 4:32 am

froze View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Baidu [Spider], Google [Bot], ironhayden08, joe1234, tomycs and 27 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited