cyclespeed wrote:I don't think you'll have any problems with stiffness.
Anyone with etap and this new crank...?
Moderator: robbosmans
rcb78 wrote:I've got one still on order and didn't know the spindle changed. Not that it really matters, but is it still a true BB30 length spindle or did the lengthen it and you have to run spacers now like a BB30A, 386evo, or something along those lines.
Good to know about the spider, I've got a Quarq on my desk waiting for it and it's reassuring to know they still fit.
elfuinha wrote:cyclespeed wrote:I don't think you'll have any problems with stiffness.
Anyone with etap and this new crank...?
elfuinha wrote:Thanks for sharing...
Note this crank as weight limit of 109kg Inc. Bike and gear.
Already bought one to use with spam red chairings and enduro xd15 pfbb30... Let's see if etap will work better in this configuration.
Enviado do meu C6903 através de Tapatalk
endershan wrote:I fit this on my tarmac SL5 using a wave washer, ~3mm spacer and the bearing seals, so I suppose the spindle is a bit longer, but it is not long enough to fit in a BBRight or a BB386 frame.
endershan wrote:elfuinha wrote:Thanks for sharing...
Note this crank as weight limit of 109kg Inc. Bike and gear.
Already bought one to use with spam red chairings and enduro xd15 pfbb30... Let's see if etap will work better in this configuration.
Enviado do meu C6903 através de Tapatalk
Is that right? The one I rode did not come with a manual. This crank is heavier than the previous version, so I don't see the reason why they put a weight limit on it...
I think as long as you are using the red chainrings, everything will be fine. Are you experiencing Etap issues with current configuration?
elfuinha wrote:endershan wrote:elfuinha wrote:Thanks for sharing...
Note this crank as weight limit of 109kg Inc. Bike and gear.
Already bought one to use with spam red chairings and enduro xd15 pfbb30... Let's see if etap will work better in this configuration.
Enviado do meu C6903 através de Tapatalk
Is that right? The one I rode did not come with a manual. This crank is heavier than the previous version, so I don't see the reason why they put a weight limit on it...
I think as long as you are using the red chainrings, everything will be fine. Are you experiencing Etap issues with current configuration?
On thrusday will put a Sworks crank and With Red Chainrings, let's see if it solves the ETAP problems i'm having in the FD.
elfuinha wrote:Still didn't ride it, for long time... Just tested to see if the FD were working...
First impression is that is very stiff... Also sram red chainrings work better with Etap.
DSC_0351.JPG
Enviado do meu C6903 através de Tapatalk
endershan wrote:cyclespeed wrote:Am I right in saying you can't buy these in anything smaller than a 170?
Yes, even at the smallest size (49), venge vias disc came with a 170mm crank.
cyclespeed wrote:endershan wrote:cyclespeed wrote:Am I right in saying you can't buy these in anything smaller than a 170?
Yes, even at the smallest size (49), venge vias disc came with a 170mm crank.
That's a real shame - they used to make 165 and 167.5, I can't understand why they would stop doing that...?