Tune MAG 160 - bearing play adjustment

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

Post Reply
extralite
Posts: 14
Joined: Mon Feb 16, 2004 8:31 pm
Location: Llanelli

by extralite

I have got a Tune MAG 160 hub (purchased 2006 or 2007) that has developed some play. I have got the TT08 tool set. I need to put in a spacer to remove the play. Could someone please explain what I need to do to get the end cap off (drive side or non-drive side?). Any help would be much appreciated as I do not want to ruin the hub.

User avatar
Frankie - B
Admin - In the industry
Posts: 6573
Joined: Mon Jun 02, 2003 8:17 am
Location: Drenthe, Holland

by Frankie - B

It is probably not what you are looking for, on my tune mag 180 I had to use two 5mm allen keys to unscrew the cap that sits over the axle and keeps the free hub body on the axle. when it was undone I had to pull with all my force (or wiggle) on the body to make it come loose.
'Tape was made to wrap your GF's gifts, NOT hold a freakin tire on.'
If you want to see 'meh' content of me and my bike you can follow my life in pictures here!

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



extralite
Posts: 14
Joined: Mon Feb 16, 2004 8:31 pm
Location: Llanelli

by extralite

Thanks for the reply. The MAG 160 hub does not have allen key ends on the axle as it is carbon. In hindsight, I wish I had the MAG 180 as it is a lot easier to service.

Post Reply