New dura-ace R9100

[Dez33]

Has anyone seen the specs on how much wider the distance is between the front chain rings? And if it is built into the rings or if the four tabs are wider?

[toiyuet]

Has anyone seen the specs on how much wider the distance is between the front chain rings? And if it is built into the rings or if the four tabs are wider?

0.4 mm?

[ipenguinking]

Can someone answer my question? I've gone thru Shimano tech docs but still could not find the answer. My question is can I simply plug-and-play the new 9150 Di2 FD, RD and shifters with a bike wired for 9070 Di2? (leaving all wires and junction-b untouched)

[Broady]

Somewhat related to the poster above, I'm hoping I can easily switch to the new DA Di2 Hydro levers from my R785.

[Packs]

I'd say so looking at this:
http://productinfo.shimano.com/#/com/2. ... acid=C-454

[ipenguinking]

Is there still a need for b-junction SM-JC41? I don't see it mention anywhere.

[shinek20]

looks great!!

[ooo]

Broady, you can, but dura-ace hydro levers still didn't have ports for sprinters buttons

ipenguinking, i think b-juction is not needed with "old" di2 setup, you can connect everything to a-junction if you have enough ports (5) and long enough di2 cables

[jeffy]

wait .... the new dura ace did hydro levers don't have sprint shifter ports?

so with hydro you can't have sprint shifters?

[TheDarkInstall]

wait .... the new dura ace did hydro levers don't have sprint shifter ports?

so with hydro you can't have sprint shifters?

If that is true, that is so lame.

[DartanianX]

With the current Hydo R785 there is only one port per shifter.

I'd assume this has been addressed in the new 9150 levers.

Sent from my BlackBerry PRIV using Tapatalk

[Ritxis]

wait .... the new dura ace did hydro levers don't have sprint shifter ports?

so with hydro you can't have sprint shifters?

Broady, you can, but dura-ace hydro levers still didn't have ports for sprinters buttons

ipenguinking, i think b-juction is not needed with "old" di2 setup, you can connect everything to a-junction if you have enough ports (5) and long enough di2 cables

Yet there is not much information, at the moment only overall characteristics, We will have to wait for the detailed

[pantani83]

any news about the release date and price of the power meter crank?

more/less 1200€ w/o chainrings.

[wheelsONfire]

Oh, i can see how this is going down. First you start with one component, then 2, 3 aso...

I think i will wait and see what happens when it comes down to Ultegra.

[Ritxis]

Mechanic http://www.chainreactioncycles.com/es/e ... prod150916
Electronic: http://www.chainreactioncycles.com/...r ... prod150933

Very very expensive