Hi Guys,
Built a 1991 Merckx with a Campag aero seat post.. I am currently running a Brooks Cambium 15 saddle at 52mm height and ideally need something around the 60mm+ height (from rail to saddle top) to get the length I need. I don't want to have to swap the seat post for another option.
I am looking for something that matches the "racing" bike rather than going one of the other Brooks options; anyone got a suggerstion? I am struggling to find measurements on Concor, Regals, Rolls, etc
If you have any and can give a rough measurement from bottom of rail to top of saddle at mid point on rails that would be great!!
Steno
Retro look saddle with high saddle top to rail height
Moderator: robbosmans
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
I just measured two saddles that I have laying in the parts box.
1) Old regal. That measures real close to 50/52mm range. It is hard to get exact due to the saddle skirt over the side.
2) Old concor. That one is in the 59/60mm range That is measured mid rail before the tail upsweep.
1) Old regal. That measures real close to 50/52mm range. It is hard to get exact due to the saddle skirt over the side.
2) Old concor. That one is in the 59/60mm range That is measured mid rail before the tail upsweep.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com