stages power meter, cervelo s3

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

Post Reply
thebadgerboy1982
Posts: 20
Joined: Mon Sep 21, 2015 6:37 pm

by thebadgerboy1982

Hi all,

Im struggling to find out if a stages dura ace 900 power meter would fit my 2014 cervelo s3. Ive used the 10mm suggestion by stages but I'm confused with the result. Depending on where the 10mm hex key is placed in the clearance zone changes the result quite a bit.

Does anyone have experience of using the dura ace power meter with the s3 and confirm there is no clearance issues? Im running a wheels manufacturing bbright to shimano with the threaded part rather than any push fit bits and a 9000 chainset.

Thanks
Ross

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



tk2306
Posts: 71
Joined: Tue Oct 29, 2013 3:40 am
Location: Melbourne - Aus

by tk2306

Not sure on his BB setup but I guy i race with has the same bike with a 9000 stages arm. So should be fine :thumbup:

Gary71
Posts: 267
Joined: Wed Aug 21, 2013 5:25 am
Location: Brisbane Australia

by Gary71

Agreed, I am using a Sram Stages - Gen 1 (the baulkier version) power meter and it fits just fine.

joepac
Posts: 100
Joined: Fri Mar 14, 2014 4:43 pm

by joepac

Fitting a stages is only an issue if the bike has the rear brake mounted under the chainstays... The S3 has normal brake placement so this isn't an issue.

Post Reply