Hello,
I've a 'Litespeed T3 i2 2015'. I wanna build them with a Campagnolo Chorus groupset.
The frame is provided with an cable guide on the bottom bracket, but there are no cable guides on the headtube for the cable of the front -and rear derailleur.. So the frame is only for an di2-groupset I think... Are there any solutions to put an mechanical group on it ?
Hope you can help me !
Campagnolo on a Litespeed T3 i2?
Moderator: robbosmans
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
- bikerjulio
- Posts: 1900
- Joined: Fri Dec 11, 2009 10:38 pm
- Location: Welland, Ontario
I was thinking something similar. Plus OP has the issue of the rear chainstay stop to deal with.
There's sometimes a buggy.
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM
Also, assuming the down tube is round which it is probably not on that Litespeed. It seems like you need to have the cable stops welded on or just go with EPS/Di2.
Last edited by AJS914 on Tue Jan 05, 2016 12:59 am, edited 1 time in total.
- bikerjulio
- Posts: 1900
- Joined: Fri Dec 11, 2009 10:38 pm
- Location: Welland, Ontario
It has a
so it might be round as some point. However I suspect you are right.biaxially ovalized down tube
There's sometimes a buggy.
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM
-
- Posts: 278
- Joined: Sun Aug 02, 2015 7:50 pm
I bought a T1 last year and set up with Campy SR. Litespeed had 2 versions and I had to specifically ask for a mechanical frame as the default was the DI2 frame.
Bianchi Oltre XR2 + Campagnolo Super Record 11 + Campagnolo Bora 50C
Litespeed T1 + Campagnolo Chorus 11 + Campagnolo Shamal Ultra
Litespeed T1 + Campagnolo Chorus 11 + Campagnolo Shamal Ultra
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com