Scott Foil Headset Bearing
Moderator: robbosmans
I've racked the internet trying to source a replacement drop in bearing for my 2011 Scott Foil and I've turned up very little outside of some sketchy looking sites with 40 dollar shipping. Ideally I'd just like to get a bearing, but if I have to get a whole headset I'd live.
The bearing reads "Ritchey Retainer" on the side and is numbered 41x30.15 45x45
I've found this:
http://www.ebay.com/itm/30-15mm-41mm-6- ... 51d3cc904c
But I have no idea what the thickness should be? My measuring tape looks close to 6.5mm but I'm pretty sure the ritchey is an 8mm variant. Chain reaction cycles carries something similar but it's a 7mm for a press fit frame, and my bearing is drop in.
Help?
The bearing reads "Ritchey Retainer" on the side and is numbered 41x30.15 45x45
I've found this:
http://www.ebay.com/itm/30-15mm-41mm-6- ... 51d3cc904c
But I have no idea what the thickness should be? My measuring tape looks close to 6.5mm but I'm pretty sure the ritchey is an 8mm variant. Chain reaction cycles carries something similar but it's a 7mm for a press fit frame, and my bearing is drop in.
Help?
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
I was looking for the same thing. Scott source at interbike said rithey 44 would work. I havent trird it though. Let us know if you try.
http://ritcheylogic.com/road/headsets/d ... adset.html
http://ritcheylogic.com/road/headsets/d ... adset.html
Here you are :
Just the bearings;
http://www.westbrookcycles.co.uk/scott- ... et-p233400
Or a complete set;
http://www.westbrookcycles.co.uk/scott- ... et-p219123
Just the bearings;
http://www.westbrookcycles.co.uk/scott- ... et-p233400
Or a complete set;
http://www.westbrookcycles.co.uk/scott- ... et-p219123
-
- Posts: 1163
- Joined: Sun May 16, 2010 7:28 pm
I had a similar issue replacing my 2011 Addict headset bearings. After the LBS ordered a pair of cane creek 41x30.15 45degx30deg IS2 bearings and they didn't quite sit right, I just bought this model off amazon:
Ritchey Headset Replacement Bearings
As far as I can tell, ritchey headsets are the only one that use that standard, although I was able to find a few international sellers on ebay selling generic cheaper bearings.
Ritchey Headset Replacement Bearings
As far as I can tell, ritchey headsets are the only one that use that standard, although I was able to find a few international sellers on ebay selling generic cheaper bearings.
kulivontot wrote:I had a similar issue replacing my 2011 Addict headset bearings. After the LBS ordered a pair of cane creek 41x30.15 45degx30deg IS2 bearings and they didn't quite sit right, I just bought this model off amazon:
Ritchey Headset Replacement Bearings
As far as I can tell, ritchey headsets are the only one that use that standard, although I was able to find a few international sellers on ebay selling generic cheaper bearings.
Did you get the press fit 1-1/8 model?
-
- Posts: 1163
- Joined: Sun May 16, 2010 7:28 pm
"Press Fit 1 1/8 and Drop In HS/Cane Creek 41.0 mm"
When I e-mailed Ritchey, they said the following:
"What you need to have the shop order is our 55050007005 Sealed Cartridge Bearings WCS 41.0/30.5/8mm 45*/45* 2pcs"
When I e-mailed Ritchey, they said the following:
"What you need to have the shop order is our 55050007005 Sealed Cartridge Bearings WCS 41.0/30.5/8mm 45*/45* 2pcs"
-
- Posts: 15
- Joined: Wed Jun 23, 2010 7:25 pm
Have you tried Cane Creek's headset finder?
Sent from my SM-N910W8 using Tapatalk
Sent from my SM-N910W8 using Tapatalk
kulivontot wrote:"Press Fit 1 1/8 and Drop In HS/Cane Creek 41.0 mm"
When I e-mailed Ritchey, they said the following:
"What you need to have the shop order is our 55050007005 Sealed Cartridge Bearings WCS 41.0/30.5/8mm 45*/45* 2pcs"
That definitely did it, came in a pack of two, works great. Thanks!
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com