Back by popular demand, the general all-things Road forum!
Moderator: robbosmans
-
tomee
- Posts: 220
- Joined: Thu Oct 16, 2014 8:52 am
- Location: AUS
by tomee on Mon Feb 15, 2016 6:32 am
oldmac wrote:The PF30 shell outside diameter is 46mm,but the BB30 shell outside diameter is 42mm,so I don't think Wheels MFG PF30 will works on caad10.
thanks. soo many different measurements getting me confused.
-
Lincs
- Posts: 18
- Joined: Wed Feb 24, 2016 11:37 pm
by Lincs on Thu Feb 25, 2016 12:58 am
I had exactly the same issue with the praxis 30/24 and di2 on my 2015 caad10 black inc disk frame. Ended up buying the Rotor 30/24 as the sleeve is a lower diameter allowing the di2 cables and even the rear disk hose to pass over/under. Worked a treat.
CAAD10 Black Inc Disc
Roubaix Pro Disc Race
Haibike Greed RC 29r
Stumpy FSR 29r
-
Danza
- Posts: 134
- Joined: Thu Jun 27, 2013 12:41 pm
by Danza on Thu Feb 25, 2016 2:30 am
oldmac wrote:The PF30 shell outside diameter is 46mm,but the BB30 shell outside diameter is 42mm,so I don't think Wheels MFG PF30 will works on caad10.
You need this one:
http://wheelsmfg.com/bottom-brackets/bb ... black.htmlThat's out of stock but different colors or bearing grades are in stock.
This is how I ran di2 internally on a system six (bb30 not pf30). It is very tight but works, I had to take a pick and push the wires around the sleeve.
-
tomee
- Posts: 220
- Joined: Thu Oct 16, 2014 8:52 am
- Location: AUS
by tomee on Thu Feb 25, 2016 4:07 am
thanks
i managed to source the wheels mfg bb30 from my LBS
took a photo during the install
Last edited by
tomee on Tue Aug 23, 2016 12:47 am, edited 1 time in total.
-
tomee
- Posts: 220
- Joined: Thu Oct 16, 2014 8:52 am
- Location: AUS
by tomee on Tue Aug 23, 2016 12:45 am
caad10dotcom wrote:Did you get this build completed? Would love to see a picture of the finished bike.
yup, completed the bike and sold it
got a caad12 disc instead.
-
tomee
- Posts: 220
- Joined: Thu Oct 16, 2014 8:52 am
- Location: AUS
by tomee on Wed Aug 24, 2016 12:56 am
caad10dotcom wrote:Ah sweet. A frameset being built up?
yes, started with a frameset on the caad12 as well.
finished it recently with a total weight of 7.9kg running di2 and r785 hydraulic brakes