HELP: Campy on Litespeed T1
Moderator: robbosmans
- irongatsby
- Posts: 404
- Joined: Fri Jan 21, 2011 7:59 am
- Location: Los Angeles
Calnago wrote: Just make sure you only use a length that doesn't have the "shimano" logo on it, otherwise it won't work
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
I would seriously consider getting some new cable guides fitted at the appropriate place or using the same brakes as Ghisallo's as they sit lower.
You could try some housing with more flex, you don't have to use bike specific housing there are plenty of options that may work better . I have tried this , its nice and flexible and should help with the bend. Just for the bend only, its to flexy to work well at the shifter end. I know because I have tried just about every kind of tubing. This could help though in your situation.
http://www.ebay.co.uk/itm/METRIC-IMPERI ... 3f3b359e30
You could try some housing with more flex, you don't have to use bike specific housing there are plenty of options that may work better . I have tried this , its nice and flexible and should help with the bend. Just for the bend only, its to flexy to work well at the shifter end. I know because I have tried just about every kind of tubing. This could help though in your situation.
http://www.ebay.co.uk/itm/METRIC-IMPERI ... 3f3b359e30
Xena a demi god among the digital demimonde that is WW community
http://i.imgur.com/hL5v3ai.jpg
https://www.flickr.com/photos/131970499@N02/
http://i.imgur.com/hL5v3ai.jpg
https://www.flickr.com/photos/131970499@N02/
-
- Posts: 278
- Joined: Sun Aug 02, 2015 7:50 pm
I will contact Litespeed as I'd be very wary of anyone else wielding stops... as i'm in the UK i doubt much can be done though
Bianchi Oltre XR2 + Campagnolo Super Record 11 + Campagnolo Bora 50C
Litespeed T1 + Campagnolo Chorus 11 + Campagnolo Shamal Ultra
Litespeed T1 + Campagnolo Chorus 11 + Campagnolo Shamal Ultra
-
- Posts: 278
- Joined: Sun Aug 02, 2015 7:50 pm
Valbrona wrote:You of course use a ferrule for the top tube cable stop, but not at the caliper.
Yep just at the top tube cable stop, no room on in the calipers these days
Bianchi Oltre XR2 + Campagnolo Super Record 11 + Campagnolo Bora 50C
Litespeed T1 + Campagnolo Chorus 11 + Campagnolo Shamal Ultra
Litespeed T1 + Campagnolo Chorus 11 + Campagnolo Shamal Ultra