Headset/headset cover for 1 1/4" steerer tube (slam!)
Moderator: robbosmans
Can anyone direct me to an upper headset bearing or headset cover which will allow me to slam the stem on my new Canyon Aeroad CF SLX?
It has an oversize steerer tube 1 1/4".
I haven't looked into exactly what type of bearing is on the bike, but I believe it should be possible to find a replacement or cover which sits almost flush with the frame...
Pro teams are using this spacer/cover, but Canyon are so far refusing to sell it to me.
It has an oversize steerer tube 1 1/4".
I haven't looked into exactly what type of bearing is on the bike, but I believe it should be possible to find a replacement or cover which sits almost flush with the frame...
Pro teams are using this spacer/cover, but Canyon are so far refusing to sell it to me.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
you could order a set intended for an ultimate cf slx which is round without the aerofoil at the back
it is just an expander and a 5 mm cover, the bearings remain in place
it may be worthwile to check with giant the do 1 1/4 too
it is just an expander and a 5 mm cover, the bearings remain in place
it may be worthwile to check with giant the do 1 1/4 too
-
- Posts: 346
- Joined: Wed Jun 16, 2010 10:58 pm
This kind of thing? https://www.ebay.co.uk/itm/254879435308 ... media=COPY
I bought the special one for pro teams from Canyon 2 or 3 years ago. Had to insist several times before they accepted selling.djm wrote:Can anyone direct me to an upper headset bearing or headset cover which will allow me to slam the stem on my new Canyon Aeroad CF SLX?
It has an oversize steerer tube 1 1/4".
I haven't looked into exactly what type of bearing is on the bike, but I believe it should be possible to find a replacement or cover which sits almost flush with the frame...
Pro teams are using this spacer/cover, but Canyon are so far refusing to sell it to me.
I also remember that price was quite crazy nearby 40€, excluding other 15€ for shipping.
Enviado desde mi ASUS_I006D mediante Tapatalk
I could 3D print you a headset dust cover if you give me the dimensions.
I already make standard size one; viewtopic.php?f=3&t=169183
I already make standard size one; viewtopic.php?f=3&t=169183
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com