SRAM Red Exogram - Retention Bolt - Does side matter?

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

Post Reply
locktopus
Posts: 165
Joined: Mon Oct 03, 2011 3:47 pm

by locktopus

Hi all,

If this is the wrong place, please let me know and I'll have the thread moved.

I acquired a SRAM Red Exogram crank and upon installation I noticed that the retention bolt is on the drive side, but the SRAM installation manual shows that the retention bolt should be on the non-drive side.

Looking through some of the sales material on SRAM's website, it appears that the retention bolt should be on the drive side. However, in their own tech videos on YouTube, the picture of the crank does not show the retention bolt on the drive side.

Does it really matter?

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



flogger7
Posts: 17
Joined: Sun Dec 28, 2014 12:38 pm

by flogger7

Depends on if you have GXP or BB 30

locktopus
Posts: 165
Joined: Mon Oct 03, 2011 3:47 pm

by locktopus

Thanks flogger. I had just finished flipping through stuff on the web and came to that same conclusion.

Thanks!

Post Reply