Hi
Recently purchased the new Pioneer PM.
Looking for the option to tick or untick "include zero's" for both cadence and power.
Have 7 years data collected from a number of brands, since changing my power numbers are now too high and my cadence too low.
I am satisfied that the unit is correctly calibrated.
Thought on setup it was within settings screen on the pioneer 500 computer but now can't find it.
Thanks in advance
Michael
Pioneer Powermeter - include or not include zero's settings.
Moderator: robbosmans
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
- Tinea Pedis
- Posts: 8616
- Joined: Sat Mar 14, 2009 6:08 am
- Contact:
Include zeros.
For any powermeter and head unit.
Normalised power is essentially what a power reading without zero looks like - so no real need to have that on the bike. As that would be at the expense of recording average power.
For any powermeter and head unit.
Normalised power is essentially what a power reading without zero looks like - so no real need to have that on the bike. As that would be at the expense of recording average power.
-
- Posts: 46
- Joined: Sat Feb 19, 2011 5:42 am
Thanks for replies but I am looking for where that option is within the pioneer bike computer.
Eg turn on or off
Eg turn on or off
Go to "Options" -> "Average Data". You then have the option of including zeroes or not in Power, Speed, and Cadence. Note that this feature arrived in firmware version 20141107.02.39 that was released at the beginning of November. You might need to update your firmware. The instructions are on the Cyclosphere site.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 46
- Joined: Sat Feb 19, 2011 5:42 am
Great. Not sure if it was just me but I couldn't see the options field. Then turned on the computer today and there it was.
Problem fixed. Thanks
Problem fixed. Thanks