EW001 unit
Moderator: robbosmans
- eliflap-scalpel
- Posts: 870
- Joined: Sun May 25, 2008 10:12 pm
- Location: italy
- Contact:
i have an issue with EW001 trasmitter unit.
not able to have it recognized by my Edge.
i have a custom set up: no shifters , only the climb shifter remote switch.
so road shifters (brakes+shifters) are mandatory to have EW001 working ?
a guy with a standard bike can unplug the shifters and see if it works on the Edge ?
not able to have it recognized by my Edge.
i have a custom set up: no shifters , only the climb shifter remote switch.
so road shifters (brakes+shifters) are mandatory to have EW001 working ?
a guy with a standard bike can unplug the shifters and see if it works on the Edge ?
http://eliflap.it/
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
- Pokerface07
- Posts: 213
- Joined: Wed Jun 06, 2012 11:43 pm
Which Edge? And have you updated all the firmware in your Di2 system?
Twitter: @FormerTTchamp https://twitter.com/FormerTTchamp
- eliflap-scalpel
- Posts: 870
- Joined: Sun May 25, 2008 10:12 pm
- Location: italy
- Contact:
is a firmware issue ?
not checked which firmware i have
not checked which firmware i have
http://eliflap.it/
- eliflap-scalpel
- Posts: 870
- Joined: Sun May 25, 2008 10:12 pm
- Location: italy
- Contact:
grouk wrote:you need to activate it with etube and upgrade firmware, i want to buy one but i need to buy other stuf and i didnt find one site that sell everyting i need, where do you buy it?
i live in Italy, bought in a shop here.
there is 1 piece on stock
http://www.gloriotticicli.it/shop/gps-c ... eless.html
http://eliflap.it/
-
- Shop Owner
- Posts: 1980
- Joined: Sat Jun 13, 2009 4:02 am
- Location: NoVA/DC
If you have the external front junction with the charger that plugs into it, you can update firmware at home. You will need to download Shimano's e-tube software first. Also make sure your Edge is fully updated. You didn't mention which Edge you have. If it's older, like the 510, the update for the eww is still in beta, last time I checked.
- eliflap-scalpel
- Posts: 870
- Joined: Sun May 25, 2008 10:12 pm
- Location: italy
- Contact:
i have edge 810 , in the 3.24 beta version
http://eliflap.it/
- eliflap-scalpel
- Posts: 870
- Joined: Sun May 25, 2008 10:12 pm
- Location: italy
- Contact:
a little step done.
update firmware of BCR2 . now EW001 is found.
but 810 in 3.24 beta version is crashing after few minutes ... created a page with battery level, gears ratio, rear gears , all data are zero ...
update firmware of BCR2 . now EW001 is found.
but 810 in 3.24 beta version is crashing after few minutes ... created a page with battery level, gears ratio, rear gears , all data are zero ...
http://eliflap.it/
- eliflap-scalpel
- Posts: 870
- Joined: Sun May 25, 2008 10:12 pm
- Location: italy
- Contact:
http://eliflap.it/
- WheresWaldo
- in the industry
- Posts: 885
- Joined: Fri Oct 13, 2006 12:52 am
- Location: North Carolina
eliflap-scalpel wrote:a little step done.
update firmware of BCR2 . now EW001 is found.
but 810 in 3.24 beta version is crashing after few minutes ... created a page with battery level, gears ratio, rear gears , all data are zero ...
Report this directly to Garmin.
- eliflap-scalpel
- Posts: 870
- Joined: Sun May 25, 2008 10:12 pm
- Location: italy
- Contact:
WheresWaldo wrote:Report this directly to Garmin.
mmm , i think to not do it.
i have a 1x10 set up.
the crashes are caused by my settings: i selected to show on the Edge the gears ( so including FD and RD )
but i have a 1x11 set up
removed it and selected only RD gears , it works flawless
http://eliflap.it/
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
- eliflap-scalpel
- Posts: 870
- Joined: Sun May 25, 2008 10:12 pm
- Location: italy
- Contact:
Garmin released the 3.28 beta version
fixed Di2 bugs
now it works !!!
http://eliflap.it/2014/11/07/risolti-i- ... min-e-di2/
fixed Di2 bugs
now it works !!!
http://eliflap.it/2014/11/07/risolti-i- ... min-e-di2/
http://eliflap.it/