Hi,
did anybody collect experiences with the reset pf24 bb? it is fairly light with 80 gramm, but what about durability, etc.?
thanks, regards,
http://www.bikeonlineshop.net/reset/res ... f-24-rr-bb
Reset PF24 Bottom Bracket-Experiences?
Moderator: robbosmans
- bikerjulio
- Posts: 1900
- Joined: Fri Dec 11, 2009 10:38 pm
- Location: Welland, Ontario
PF30 by design allows for wider tolerances at the BB shell, and I can't help but think that the success of that adapter depends a lot on the frame tolerance, and method of installation. Plus I could be wrong but I thought PF30 was intended to use delrin inserts. In other words, I'd be worried about it coming loose in the frame.
This, OTOH I'd have a lot more confidence in. https://praxiscycles.com/product/shimano-conversion-bb/
This, OTOH I'd have a lot more confidence in. https://praxiscycles.com/product/shimano-conversion-bb/
There's sometimes a buggy.
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
bikerjulio wrote:PF30 by design allows for wider tolerances at the BB shell, and I can't help but think that the success of that adapter depends a lot on the frame tolerance, and method of installation. Plus I could be wrong but I thought PF30 was intended to use delrin inserts. In other words, I'd be worried about it coming loose in the frame.
This, OTOH I'd have a lot more confidence in. https://praxiscycles.com/product/shimano-conversion-bb/
me too
i had the reset bearings in my moots rsl (pf30) but experienced creaking and sqeaking without end
now have the praxis conversion for more than a year and it runs absolutely trouble free
in general, pressfit bearings sitting outside the bottom bracket shell it asking for trouble
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Hi,
thanks a lot for your replies!
cracking and moving in the frame is, what i expected, considering the design of the reset-bb. thanks for your confirmation!
i use rotor 4624 at the moment, which offers much more contact face to the bb-shell of the frame. it works trouble-free as well, no loctite required, but with 137 gramm its a bit heavy (frame weighs ca 700 gr!
does anybody know the weight of the praxis adapters?
thanks, regards
thanks a lot for your replies!
cracking and moving in the frame is, what i expected, considering the design of the reset-bb. thanks for your confirmation!
i use rotor 4624 at the moment, which offers much more contact face to the bb-shell of the frame. it works trouble-free as well, no loctite required, but with 137 gramm its a bit heavy (frame weighs ca 700 gr!
does anybody know the weight of the praxis adapters?
thanks, regards