Gxp bb for Scott Foil
Moderator: robbosmans
Shimano 105 and GXP crank have the same spindle length and O.D.
Scott Foil has BB86 which is 86mm wide and 41mm I.D.
To confirm if the BB will fit your Foil, you need to take calipers and measure the OD of it. If is is 46mm it won't fit. If it is 41mm it is the right one for BB86. It is labeled GXP so it has the correct bearing ID for your GXP crank.
Scott Foil has BB86 which is 86mm wide and 41mm I.D.
To confirm if the BB will fit your Foil, you need to take calipers and measure the OD of it. If is is 46mm it won't fit. If it is 41mm it is the right one for BB86. It is labeled GXP so it has the correct bearing ID for your GXP crank.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
- bikerjulio
- Posts: 1900
- Joined: Fri Dec 11, 2009 10:38 pm
- Location: Welland, Ontario
Shimano 105 and GXP crank have the same spindle length and O.D.
Not quite correct.
Shimano spindles are 24mm all the way along.
GXP spindles are reduced from 24mm dia to 22mm dia at the NDS end. The "shoulder" on the spindle acts as a stop, and when tightened the NDS crank is clamped to the bearing.
If your bearing fits the frame - then you are good to go. If not there are BB's available for GXP in a BB86 frame.
There's sometimes a buggy.
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM
thanks for the clarification bj. bj is correct OP. The GXP BB you show has a 22mm dia on the non drive side and is 24mm on the drive or chainring side of the crank. If the BB measures 41 mm for outside diameter, then is will fit your BB86. Make sure that you orient the 22mm diameter bearing ID on the non drive side when installing if determined to be the correct BB for your Foil.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 938
- Joined: Mon Jan 24, 2011 8:09 pm
Wheels manufacturer has a real nice BB for this setup with all sorts of bearing options. Aliminum kcnc inner...real nice. Yes pricey, but angular bearings etc.