Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Sat Jun 25, 2016 8:21 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 11 posts ] 
Author Message
 Post subject: Colnago Bottom Bracket
PostPosted: Thu Aug 14, 2014 5:34 pm 
Offline

Joined: Thu Dec 09, 2004 5:51 pm
Posts: 168
The new Colnago C60 and V1-r have Colnago's own BB standard. I believe for a 30 mm spindle (THM) it is just a pressfit. Has anybody installed a Clavicula in a c60 ? What would be the best route to go using your existing bearings ? Can you just get the cups ?


Top
   
PostPosted: Thu Aug 14, 2014 6:17 pm 
Offline
User avatar

Joined: Tue Jul 19, 2011 8:07 pm
Posts: 8
Location: Chicago, IL
I just installed one of these on my V1-R.

You need the Shimano Press Fit BB Road for the C60 and V1-R. It presses right into the threaded cups in the frame.

I'd suggest some loctite 640 or 609 on pressed in surfaces just to make sure you don't have any issues down the road with creaking.

Hope this helps!


Top
   
PostPosted: Fri Aug 15, 2014 1:16 am 
Offline

Joined: Mon Jun 06, 2011 7:16 pm
Posts: 552
Location: Irvine, CA
Who had the V1-r in stock?


Top
   
PostPosted: Fri Aug 15, 2014 2:57 am 
Offline

Joined: Thu Dec 09, 2004 5:51 pm
Posts: 168
Kmenon610, did you install a shimano crankset or THM ?

Also curious to where you found your V1-r. ?

Let us know what you think of it


Top
   
PostPosted: Sun Aug 17, 2014 8:03 am 
Offline

Joined: Mon Jun 06, 2011 7:16 pm
Posts: 552
Location: Irvine, CA
I have been looking for one of these framesets without sucess.


Top
   
PostPosted: Mon Aug 18, 2014 3:11 pm 
Offline
User avatar

Joined: Tue Jul 19, 2011 8:07 pm
Posts: 8
Location: Chicago, IL
Hey all!

Sorry for the delay in response! I installed a THM M3 crankset on my frame.

I'll try and get some photos soon and post them to the forum for you guys.

The reason I have a V1-R is because I work for Colnago. I received a first production version.

Other dealers should have them in stock mid to late September.

Thanks guys!


Top
   
PostPosted: Fri Aug 22, 2014 9:47 pm 
Offline
Shop Wrench
User avatar

Joined: Tue Oct 15, 2013 6:30 am
Posts: 128
Location: Gloucester, UK
South West Bike Builders have the V1-r in stock!!

https://www.facebook.com/14496474558780 ... =1&theater

regards
ianSWBB

_________________
www.southwestbikebuilders.co.uk

https://www.facebook.com/pages/South-We ... 4745587802


Top
   
PostPosted: Thu Nov 20, 2014 11:17 pm 
Offline

Joined: Thu Dec 09, 2004 5:51 pm
Posts: 168
Can anyone confirm exactly what model of cups they used in the new Colnago thread fit BB and THM cranks. My V1-r is shipped and was ready to buy the Rotor Prass fit 4130 cups but talked to Jason At Fairwheel and he didn't think they would work but didn't know for sure. He thought maybe the lightning 86 cups might work. I know THM makes cups but after 2 sets with ceramic I don't feel like dropping $160.


Top
   
PostPosted: Fri Nov 21, 2014 5:34 pm 
Offline
User avatar

Joined: Fri Sep 17, 2010 4:48 pm
Posts: 212
I just placed my order for a C60 to replace my stolen C59, Hi kmenon610!

I'm using the Shimano Dura-Ace BB91-41B Press-Fit Bottom Bracket for 24mm wide crankset spindles and as I understand any PF86/92 BB will work.

-J


Top
   
PostPosted: Sat Nov 22, 2014 6:03 pm 
Offline
User avatar

Joined: Tue Jul 19, 2011 8:07 pm
Posts: 8
Location: Chicago, IL
For anyone using a crank with a 30mm spindle, there are a few options.

For a THM crank, you can use the THM press fit BB86 bottom bracket. If you use this, you'll most likely need an extra 1mm spacer on the non-drive side so the arm does not rub on the thread fit cup.

To avoid using the spacer, you could probably use the Enduro BB86/92 to BB386 bottom bracket. On the non drive side of that BB, the bearing sits flush with the edge of the BB shell unlike the THM which is recessed.

FSA makes a BB86/30 for their BB386 cranksets and Rotor has their press fit 4130 bb.

The only other BB that I know of is the Kogel BB86-30. Theoretically that should work with any of the 30mm spindle cranks but I have not tried it.

If you guys have tried any other methods, let me know. I'd love to hear your experience!

Thanks guys!


Sent from my iPad using Tapatalk


Top
   
PostPosted: Sat Sep 12, 2015 8:09 am 
Offline
User avatar

Joined: Tue Mar 17, 2015 1:56 am
Posts: 421
Hi,
reviving this thread in the hope that someone knowledgeable re: Colnago C60's and THM cranks might chime in. I have a THM M3 crank and trying to install this. Thought I would be fine with the Shimano Press Fit BB but can't see how these even fit into the Colnago. If anyone has anything for me I would be grateful. Mechanic who hasn't seen much of this sort of stuff didn't get there (and fair enough, it is pretty specific). I have contacted THM however they're entitled to their weekend! So yes, if anyone knows, it would be great to hear.

thanks

_________________
Parlee Z3/Hyperons/Pave 27 mm - 6.30 kg
Oltre XR2/Bora 80/Arenberg - 6.97 kg


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 11 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Colnago C60 - Campagnolo bottom bracket

[ Go to page: 1 2 ]

in Road

wedgie

27

1363

Tue Mar 08, 2016 11:33 pm

Miller View the latest post

There are no new unread posts for this topic. Colnago C60 bottom bracket - stupid question - help!

in Road

greentimgreen

2

587

Sun Aug 16, 2015 9:15 pm

greentimgreen View the latest post

There are no new unread posts for this topic. What bottom bracket do I have?

in Road

G6612

3

279

Thu May 05, 2016 8:58 pm

Calnago View the latest post

There are no new unread posts for this topic. Which GXP bottom bracket?

in Road

cnyn

8

498

Wed May 11, 2016 6:44 pm

topflightpro View the latest post

There are no new unread posts for this topic. bottom bracket tool

in Road

goldielox

11

700

Sat Feb 13, 2016 3:38 pm

BRM View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Bing [Bot], calleking, micky, Wookski and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited