Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Sun Sep 25, 2016 3:05 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 19 posts ]  Go to page 1 2 Next
Author Message
PostPosted: Sun Aug 10, 2014 9:30 pm 
Offline

Joined: Mon Mar 31, 2014 9:56 pm
Posts: 13
Hi guys, does anyone have any experience with fibre lyte mech plates and carbon jockey wheel? Due to upgrade my terrible xexon rear mech to a centaur and was wondering if anyone runs with these or thinks I should steer clear?
Thanks, Tom
http://www.fibre-lyte.co.uk/fl/fl_cycles_carbon_gear_mech.html
http://www.fibre-lyte.co.uk/fl/fl_cycles_carbon_pulley_wheel.html


Top
   
PostPosted: Sun Aug 10, 2014 10:07 pm 
Offline

Joined: Sun Jun 17, 2007 6:56 pm
Posts: 736
I run both on my Sram Red RD and they've been great so far. Really well made and super easy to install.

_________________
6.24kg CAAD10


Top
   
Posted: Sun Aug 10, 2014 10:07 pm 


Top
   
 
PostPosted: Mon Aug 11, 2014 12:23 am 
Online
User avatar

Joined: Thu Mar 24, 2011 6:06 pm
Posts: 688
I used the minimalist version of the campagnolo rear derailleur carbon plate for almost 3 years, before it snapped on a long ride. I could still route the chain over the jockey wheels and carry on but had to use the 14 teeth cog to get the straightest chainring possible. After riding close to 80km like that, the rear derailleur cage was slightly warped and I had to get a new one.

I've since decided against risking the possibility of ruining a super record rear derailleur to save a few grams...

_________________
Trek Mad-one 7 Series team colours http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=115500&start=15


Top
   
PostPosted: Mon Aug 11, 2014 12:25 am 
Offline

Joined: Tue Aug 02, 2011 9:20 pm
Posts: 1646
Location: New Zealand
Running the 2gram cage on a Campag Record RD and no problems, whish they'd make one for the fron tplate - if that could be done

_________________
2012 BMC SLR 6.02kg http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=110390


Top
   
PostPosted: Mon Aug 11, 2014 2:30 am 
Offline

Joined: Tue Dec 04, 2012 3:57 am
Posts: 119
dereksmalls wrote:
Running the 2gram cage on a Campag Record RD and no problems, whish they'd make one for the fron tplate - if that could be done


I want to try the ultra light version for Sram Red RD, but wonder if there's a risk of the chain derailing without tabs on the cage plate?


Top
   
PostPosted: Mon Aug 11, 2014 7:27 am 
Offline
User avatar

Joined: Tue Nov 13, 2007 1:19 pm
Posts: 20
Location: Scotland, UK
I've got both and they are great. I would say to be careful of the bolt inserts on the mech plate since these do protrude and can catch your spokes if you have some obscure lacing pattern or tied spokes (one of the carbon spoke ties on my lightweights used to catch the bolt insert ever so slightly). The jockey wheels are super smooth and I've not come across anything smoother however they do wear down and become throwing stars relatively quickly but you can't expect much else from carbon, if you don't have a problem with the cost and more regular replacement you won't be disappointed.

Sent from my GT-N7100 using Tapatalk


Top
   
PostPosted: Mon Aug 11, 2014 12:56 pm 
Offline

Joined: Mon Mar 31, 2014 9:56 pm
Posts: 13
Thanks for all your comments. Will definitely be buying these components.


Top
   
PostPosted: Mon Aug 11, 2014 2:28 pm 
Offline
User avatar

Joined: Thu Nov 10, 2005 5:31 pm
Posts: 3700
Location: Surrey B.C. Canada
I have had their products for years and they are amazing. I have the plates, pulleys, custom chainrings, spiderless chainrings and some custom single speed cogs and spacers. Everything has held up for years. They make a great product.

_________________
BIG DADDY B FLOW
AERO & LIGHT is RIGHT

Cervelo SLC 5960g/13.13 lbs


Top
   
PostPosted: Mon Aug 11, 2014 3:10 pm 
Offline

Joined: Fri Feb 12, 2010 4:26 am
Posts: 629
Had a mech plate that ran well for a few weeks before snapping in half while working on the bike in a workstand. I wouldn't recommend it.


Top
   
PostPosted: Tue Aug 12, 2014 3:59 am 
Offline

Joined: Tue Aug 02, 2011 9:20 pm
Posts: 1646
Location: New Zealand
What were you doing to it to snap it? I've had mine for probably 2-3 years now with no problems at all and has been swapped between 3 RDs so far without a single issue - and I'm a shitty rough mechanic too

_________________
2012 BMC SLR 6.02kg http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=110390


Top
   
PostPosted: Sat Aug 16, 2014 7:45 pm 
Offline
User avatar

Joined: Mon Aug 02, 2010 6:05 pm
Posts: 113
drainyoo wrote:
I run both on my Sram Red RD and they've been great so far. Really well made and super easy to install.

+1

_________________
R.J.
Some people tune their car, I prefer to tune my bike.
http://ilcappellino.blogspot.com/


Top
   
PostPosted: Sun Aug 17, 2014 6:31 pm 
Offline

Joined: Tue Jun 22, 2010 8:43 pm
Posts: 157
Location: UK
I have one on a dura ace 7900 it's been modified heavily. It's only has the two holes and the piece between, just like a dog bone shape weight is around two grams if I can remember but hasn't been any problems .


Sent from my iPhone using Tapatalk


Top
   
PostPosted: Sun Aug 17, 2014 7:12 pm 
Offline

Joined: Mon Jun 06, 2011 7:16 pm
Posts: 581
Location: Irvine, CA
Ditto all the above positive comments. I have both on many bikes without any problems.


Top
   
PostPosted: Sun Aug 17, 2014 8:03 pm 
Offline
User avatar

Joined: Thu Nov 10, 2005 5:31 pm
Posts: 3700
Location: Surrey B.C. Canada
Operator error I would venture a guess if it had issues.

_________________
BIG DADDY B FLOW
AERO & LIGHT is RIGHT

Cervelo SLC 5960g/13.13 lbs


Top
   
PostPosted: Sun Dec 07, 2014 1:28 pm 
Offline

Joined: Wed Apr 11, 2012 12:37 pm
Posts: 57
Hi,
Sorry for bringing up an old thread but I was found this as I was thinking about what small and relatively cheap mods I could do.
I know the mech plate is cosmetic but do the jockey wheels perform well?
I've thought of aftermarket ones before but was told they can be too stiff compared to the OEM ones.
Fiberlyte say theirs have some play so does this solve that issue?

Lastly, I have a Campag Centaur chainset, Record front and rear mechs with a KMC chain.
Is it worth getting the Fiberlyte chainrings? I'm currently very happy with the Campag shifting.
I guess the main thoughts are with the durability of the rings compared to OEM.

I'll possibly go lighter with the crank arms at a later date.

Cheers


Top
   
Posted: Sun Dec 07, 2014 1:28 pm 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 19 posts ]  Go to page 1 2 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Fibre-Lyte 'ultra lyte' rear gear mech inner plate

in Road

DavidG

4

677

Wed Dec 23, 2015 10:59 pm

UpFromOne View the latest post

There are no new unread posts for this topic. Fibre Lyte chainring bad shifting

[ Go to page: 1 2 ]

in Road

KCookie

17

850

Sun Jul 31, 2016 6:04 am

KCookie View the latest post

There are no new unread posts for this topic. Campagnolo Jockey Wheels

in Road

Devon

2

689

Mon Nov 23, 2015 11:33 pm

Devon View the latest post

There are no new unread posts for this topic. 11 speed Shimano jockey wheels

in Road

GT8

8

876

Thu Dec 24, 2015 8:51 pm

Zigmeister View the latest post

There are no new unread posts for this topic. Sram Red 22 med cage with 15 t jockey wheels ?

in Road

chris14

4

486

Sun Mar 20, 2016 8:18 pm

chris14 View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: citizend13, DRAwpt, tomycs, Yahoo [Bot] and 41 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited